Is There Fluoride in Missouri Water?
Yes, for most residents, because 72.2% of people on Missouri community water systems received fluoridated water in 2020. That figure does not establish the current status of every water system or private well. For other locations, see fluoride in tap water by city.
How much of Missouri’s water is fluoridated?
In 2020, 72.2% of the population served by Missouri community water systems received fluoridated water, according to CDC reporting data. This is a population-based percentage: it describes people served, not the percentage of water systems or the percentage of water samples containing fluoride.
The figure is also a snapshot of 2020, not a current reading for a particular address. It does not include a measured fluoride concentration in milligrams per liter, and it does not tell you whether an individual utility adds fluoride. Residents using private wells are not represented by the community-water-system figure.
Fluoride can occur naturally in water. Finding fluoride in a sample does not, by itself, establish that fluoride was added through community water fluoridation.
What is Missouri’s law or policy on fluoride?
The reporting data cited here does not establish a statewide Missouri requirement or prohibition on adding fluoride. The 2020 percentage alone cannot tell you what state law requires or what policy a particular utility follows.
For the policy affecting your address, ask your water utility whether it adds fluoride and where you can find its current water-quality report. A utility’s answer about its own system should not be assumed to apply to every system in Missouri.
How can I find out about my city or water utility?
Start with the name of the provider on your water bill. If you rent or do not receive a water bill, a building manager or local utility office may be able to identify the provider.
Then take these steps:
- Find the utility’s annual drinking-water quality report. Look for fluoride in the reported results, and check the report’s sampling year and units. A city name alone may not identify the right report if your address is served by a different provider.
- Ask the utility about its water. If the report is unclear or does not list a fluoride result, ask for the latest fluoride concentration, when it was measured, and whether the utility adds fluoride. Distinguish its reported concentration from a recommended level or regulatory limit.
- Check your tap or well if needed. A utility report describes its reported water-quality results, not necessarily a measurement taken at your particular tap. If you use a private well or want an address-specific result, ask a laboratory about a fluoride test and its sampling instructions.
For more on collecting a sample, see how to test water quality at home. If you use a filter, check whether the specific product is certified for fluoride reduction; not every pitcher filter is designed to reduce fluoride. Our guide to the best pitcher water filters can help you compare options.
What do the fluoride levels mean?
The following numbers are reference points, not measured Missouri levels. They serve different purposes and should not be treated as interchangeable.
| Reference | Level | Meaning |
|---|---|---|
| US Public Health Service recommendation | 0.7 mg/L | Recommended fluoride level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | A federal secondary standard, which is not federally enforceable |
| EPA maximum contaminant level | 4.0 mg/L | An enforceable federal limit for public drinking-water systems |
A utility’s measured result may differ from these values. The 0.7 mg/L recommendation is not a measurement of water at your address, and the two EPA standards are not estimates of what Missouri water contains. Compare a reported result with these references only after checking its units and sampling year.
Who should I ask about fluoride?
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the Missouri data come from?
The Missouri percentage comes from the CDC community water fluoridation state and county data, which draws on the Water Fluoridation Reporting System. The figure cited here is for 2020 and covers the population served by community water systems.
That source supports the statewide percentage, but it does not supply a current fluoride measurement for your tap in the information used here. Your utility’s report or a fluoride test is the more specific place to look for a concentration at your water source.
Frequently asked questions
Can I tell whether water contains fluoride by looking at it?
Appearance alone does not establish whether water contains fluoride or how much it contains. Check your utility’s results or arrange a fluoride test.
Does a utility’s fluoride result describe water after my home filter?
Not necessarily. Check whether your particular filter is certified for fluoride reduction, or test the water after filtration if you need a result for that tap.