Is There Fluoride in Missoula Water?
Yes, fluoride is present: about 0.16 mg/L was measured in 2012–2019, but whether the utility adds fluoride is not reported.
Is fluoride added to Missoula water?
Fluoride was detected in Missoula Water’s finished-water samples, but a detection alone does not establish whether the fluoride occurred naturally or was added. Natural fluoride in a water source is not the same thing as a utility adding fluoride for community water fluoridation.
The historical sampling data do not report Missoula Water’s fluoridation status. For a comparison with other systems, see fluoride in tap water by city.
How much fluoride was measured in Missoula water?
The EPA’s 2012–2019 compliance-monitoring data include 93 finished-water samples for Missoula Water. Fluoride was detected in 82 of them. The reported mean of the detected results was 0.16 mg/L; the maximum recorded result among the samples was 1.0 mg/L.
| Measurement or benchmark | Fluoride level | Basis |
|---|---|---|
| Missoula Water mean | 0.16 mg/L | Mean of detected finished-water compliance samples, 2012–2019 |
| Missoula Water maximum | 1.0 mg/L | Highest finished-water compliance sample result, 2012–2019 |
| US Public Health Service recommended level | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Non-enforceable secondary drinking-water standard |
| EPA maximum contaminant level | 4.0 mg/L | Enforceable drinking-water limit |
Both historical Missoula Water figures were below the EPA’s 2.0 mg/L secondary standard and 4.0 mg/L limit. The 0.16 mg/L mean was below the 0.7 mg/L recommended fluoridation level, while the 1.0 mg/L maximum was above it. The recommended level applies to community water fluoridation; it does not establish whether Missoula Water adds fluoride.
The mean covers detected results, not all 93 samples. Neither that historical mean nor the maximum tells you the fluoride concentration at a particular Missoula tap today or establishes current regulatory compliance.
What do county and Montana figures show?
A county-wide fluoridation percentage is not available in the data used here. The Missoula Water results describe that water system, so they should not be assumed to represent every public system or private well in Missoula County.
For Montana, the CDC reported that 31.4% of the public-water-system population received fluoridated water in 2020. That is a statewide figure, not a Missoula County figure or a statement about Missoula Water’s status. It also does not describe the share of all Montana residents, including those outside public water systems.
What is Montana’s law or policy on water fluoridation?
The information reviewed does not establish a Montana statewide fluoridation policy. It also does not establish a local decision or requirement for Missoula Water. The statewide percentage alone cannot show what the law requires or whether a particular utility adds fluoride.
For an answer about current policy, ask Missoula Water or the relevant Montana drinking-water authority. Ask separately about the utility’s current practice and the law: a report of fluoride in a sample does not answer both questions.
How can you check your water or remove fluoride?
If Missoula Water supplies your home, request its latest drinking-water quality report and ask whether fluoride is added. The historical EPA record identifies the system as MISSOULA WATER, system ID MT0000294. Confirming your supplier matters because a nearby address may receive water from a different system.
For a result specific to your tap, use a laboratory that tests drinking water for fluoride and follow its sampling instructions. If you use a private well, arrange a test for that well rather than relying on Missoula Water’s system results. Learn more about how to test water quality at home.
If you want to reduce fluoride, a reverse-osmosis system is one option. Check that the specific model has independent certification for fluoride reduction, install and maintain it as directed, and consider testing the treated water. Filter performance depends on the product and its maintenance.
Pitchers differ in what they remove; do not assume every pitcher filter reduces fluoride. When comparing the best pitcher water filters, check the specific model’s certified fluoride-reduction claim.
Who should ask for advice?
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the information come from?
The EPA Six-Year Review 4 compliance-monitoring data contain the 2012–2019 finished-water results for Missoula Water. The 0.16 mg/L figure is the mean of detected results in that historical dataset, not a current tap measurement.
The CDC community water fluoridation dataset is the source for Montana’s 2020 public-water-system population figure. For current local practice and newer results, contact Missoula Water directly.
Frequently asked questions
Does boiling water remove fluoride?
No. Boiling does not remove fluoride and can increase its concentration as water evaporates.
Can you tell whether water contains fluoride by looking at it?
No. A clear glass of water does not tell you whether fluoride is present; a fluoride test can measure it.
Does every refrigerator filter remove fluoride?
No. Check the specific filter model for an independently certified fluoride-reduction claim.