Is There Fluoride in Mississippi Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, for most residents: 61.1% of people on community water systems received fluoridated water in 2020. That statewide figure does not tell you the fluoride concentration in your own water or whether your particular utility adds it. For comparisons beyond Mississippi, see fluoride in tap water by city.

How much of Mississippi’s water is fluoridated?

In 2020, 61.1% of Mississippi residents served by community water systems received fluoridated water, according to CDC data. The percentage describes people served, not the percentage of water systems that fluoridate or the percentage of water sources containing fluoride.

It also does not cover every resident. For example, someone using a private well is not represented by a figure for people served by community water systems. The 2020 figure is a historical snapshot, so it should not be assumed to describe the current percentage.

Fluoride can occur naturally in water. Community water fluoridation involves adjusting fluoride in a water supply; finding naturally occurring fluoride alone does not establish that a utility adds it.

Does Mississippi require water fluoridation?

The CDC figure does not establish whether Mississippi requires, permits or prohibits community water fluoridation. It also does not identify a statewide fluoride concentration or tell you what an individual utility does.

For current policy, consult the Mississippi State Department of Health or ask your water utility about the rules and decisions that apply to its system. A utility can explain its own practice, but that answer should not be treated as a statement about every water system in Mississippi.

How can you find out about your city or utility?

Start by identifying the water system that serves your address. Its name may appear on your water bill; if water is included in your rent, ask your landlord or property manager. A city name alone is not always enough to identify the system serving a particular address.

Next, look for the system’s latest annual drinking water quality report, also called a Consumer Confidence Report. Check the fluoride entry for the reported result, the unit of measurement and the period covered. If the report gives a range as well as a result, ask the utility which figure best describes your water and how it was measured.

If you cannot find a fluoride entry or need a more recent result, contact the utility. Ask whether it adds fluoride, whether fluoride occurs naturally in its source water, and what its latest fluoride test showed in milligrams per liter (mg/L). A report or utility representative can also clarify which sampling period the result covers.

For a private well, a community water system report will not establish the fluoride level at your tap. Testing your water is a way to obtain a result for your own supply; see how to test water quality at home for guidance. Choose a test that specifically measures fluoride and follow its sampling instructions, or ask a qualified laboratory about fluoride testing.

If you are considering filtration, check a product’s specifications and certification for fluoride reduction rather than assuming every filter removes it. Our guide to the best pitcher water filters can help you compare options.

What do fluoride levels and standards mean?

Fluoride results are commonly reported in mg/L. The following numbers serve different purposes; none is a measured Mississippi water level.

Fluoride levelWhat it means
0.7 mg/LThe US Public Health Service’s recommended level for community water fluoridation. It is a recommendation, not the EPA maximum contaminant level.
2.0 mg/LThe EPA’s secondary standard for fluoride. Secondary standards are generally non-enforceable federal guidelines, though states may adopt enforceable rules.
4.0 mg/LThe EPA’s maximum contaminant level for fluoride in public drinking water.

A statewide percentage of people receiving fluoridated water cannot be compared directly with these concentration standards. To make that comparison, you need a fluoride result in mg/L from your own system or well, along with the sampling period.

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Where does the Mississippi data come from?

The CDC’s community water fluoridation dataset reports the share of the Mississippi public water system population receiving fluoridated water. The Mississippi figure cited above is for 2020.

That source is useful for a statewide snapshot, but it does not provide a measured fluoride concentration for your address here. Your utility’s report or a test of your own supply is the more direct place to look for a local measurement. Check the date and basis of any result before comparing it with another report or a national standard.

Frequently asked questions

Does boiling water remove fluoride?

No. Boiling does not remove fluoride and can increase its concentration as water evaporates.

Is 1 mg/L of fluoride the same as 1 ppm?

For drinking water, 1 mg/L is approximately equal to 1 part per million, or ppm.

Can you tell whether water contains fluoride by looking at it?

No. Clear water can contain dissolved fluoride; a water report or a fluoride-specific test is needed to check its level.