Is There Fluoride in Minnesota Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, for most residents: in 2020, 98.8% of people on Minnesota community water systems received fluoridated water. That statewide figure does not identify the fluoride level at a particular address or establish whether a specific utility adds fluoride. For comparisons elsewhere, see fluoride in tap water by city.

How much of Minnesota’s water is fluoridated?

In 2020, 98.8% of the Minnesota population served by public water systems received fluoridated water, according to the CDC’s water fluoridation reporting data. The figure describes people served, not the percentage of water systems or the percentage of Minnesota’s land area with fluoridated water.

It is also a historical coverage figure, not a current reading from a household tap. It does not tell you the fluoride concentration in a particular city or whether the water at your address has fluoride added during treatment.

Private wells are not included in the public-water-system population represented by that figure. If your home uses a private well, the statewide percentage cannot tell you whether fluoride is present in your water.

What is Minnesota’s water fluoridation policy?

The statewide coverage data does not state what Minnesota law currently requires for fluoridation. It also does not establish the treatment policy of an individual utility. For current information about state requirements, contact Minnesota’s drinking water authority; for a system’s practices, contact the utility that serves your address.

A finding of fluoride in water is not, by itself, proof that fluoride was added. Fluoride can occur naturally in a water source, while fluoridation refers to a treatment practice. When asking a utility about its water, distinguish between the fluoride concentration it reports and whether it adds fluoride during treatment.

The 2020 coverage percentage should not be used to fill in either answer for a particular utility. A local report or a direct response from the water provider is more useful for identifying what applies to your service area.

How can you find the fluoride level in your city or utility’s water?

Start by identifying the water provider for your address. Its name may appear on your water bill; if water is included in your rent, a property manager may be able to identify the provider. A city name alone may not be enough to confirm which system serves a home.

Ask the provider for its latest Consumer Confidence Report, sometimes called an annual drinking water quality report. Look for fluoride in the reported test results, and note the sampling year, the units and whether the result is an average, a range or another type of measurement. If the report is unclear, ask the utility to explain the result and whether fluoride is added during treatment.

A utility report describes the system’s reported water results; it is not necessarily a test of the water from your own tap. If you want a household-specific result, ask a qualified laboratory about testing for fluoride and follow its sampling instructions. Our guide to how to test water quality at home explains how to approach water testing.

If you use a private well, a test of that well is more relevant than a city utility report. Check the laboratory’s reporting units and detection limit when reviewing the result: a finding below a detection limit is not the same as an exact measurement of zero.

If you are considering a filter, check whether the specific model and replacement cartridge are independently certified for fluoride reduction. Not all pitchers are designed to reduce fluoride. The guide to the best pitcher water filters can help you compare options, but verify the fluoride claim for the exact product you choose.

What do the fluoride numbers mean?

The following figures are reference points, not measured Minnesota fluoride levels. Concentrations are expressed in milligrams per liter, or mg/L.

Fluoride levelWhat it represents
0.7 mg/LThe US Public Health Service’s recommended level for community water fluoridation.
2.0 mg/LThe EPA’s secondary drinking water standard, which is not federally enforceable.
4.0 mg/LThe EPA’s maximum contaminant level, an enforceable federal limit for applicable public water systems.

These numbers serve different purposes. The recommended fluoridation level is not the same kind of figure as the EPA’s secondary standard or its enforceable limit. Compare a local test result with the appropriate reference rather than treating the three numbers as interchangeable.

The Minnesota coverage percentage is a different kind of measurement altogether: it describes people receiving fluoridated water, not a concentration in mg/L. The statewide data does not provide a measured fluoride concentration for your utility or household.

When should you ask a dentist or doctor?

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Where does the Minnesota fluoride data come from?

The statewide coverage figure comes from the CDC’s Community Water Fluoridation State and County Level data, which draws on the Water Fluoridation Reporting System. The Minnesota figure cited here is for 2020 and describes the population served by public water systems receiving fluoridated water.

Use that source to understand the statewide coverage reported for that year. For a more specific answer, check the sampling year and results in your utility’s report or arrange a test of your own water. Neither the statewide percentage nor the national reference levels substitute for a local measurement.

Frequently asked questions

Does the Minnesota coverage figure include private wells?

No. The 2020 figure describes people served by public water systems, so it does not establish whether an individual private well contains fluoride.

Does finding fluoride mean a utility added it?

No. Fluoride can occur naturally in a water source. Ask the utility whether it adds fluoride and what its reported test results show.

Do all pitcher filters reduce fluoride?

No. Check whether the specific pitcher and replacement cartridge are independently certified for fluoride reduction.