Is There Fluoride in Minneapolis Water?
Yes, the Minneapolis utility adds fluoride; its reported 2025 average was about 0.67 mg/L.
Does Minneapolis add fluoride to its water?
Yes. The CDC’s 2025 fluoridation status report lists the Minneapolis public water system, identified as MN1270024, as fluoridated. The utility adds fluoride rather than relying only on fluoride that occurs naturally in water.
The distinction matters when comparing systems: a water supply can contain naturally occurring fluoride without the utility adding it. For comparisons with other locations, see fluoride in tap water by city.
The Minneapolis status applies to the named public water system. If you live in the area but get water from a different utility or a private well, check that source separately.
How much fluoride is in Minneapolis water?
The 2025 Minneapolis drinking water report lists a measured fluoride average and range. The table compares those measurements with the national recommendation and EPA standards.
| Measurement or standard | Fluoride level | Basis |
|---|---|---|
| Minneapolis average | 0.67 mg/L | Measured average in the 2025 utility report |
| Minneapolis range | 0.65–0.69 mg/L | Measured range in the 2025 utility report |
| US Public Health Service recommended level | 0.7 mg/L | Recommendation for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Federal secondary standard |
| EPA maximum contaminant level | 4.0 mg/L | Enforceable federal limit |
The 2025 Minneapolis average was slightly below the recommended level and below both EPA standards. The secondary standard is not federally enforceable; the maximum contaminant level is an enforceable limit.
An average summarizes results rather than showing the exact concentration in every sample. The reported range provides more context, but neither figure is a real-time reading from an individual tap.
How does Hennepin County compare with Minnesota?
In 2020, 99.8% of the Hennepin County population served by public water systems received fluoridated water. For Minnesota as a whole, the comparable figure was 98.8%, according to the CDC’s state and county fluoridation data.
Both percentages describe people served by public water systems, not every resident or every water source. They do not establish the fluoride status of a particular private well or identify which utility serves a particular address.
The county and state figures also refer to 2020, while the Minneapolis utility measurement is from its 2025 report. They answer different questions: coverage across a population versus fluoride concentration in one system’s reported water samples.
What does Minnesota law say about fluoridation?
The sources cited here establish Minneapolis’s fluoridation status and report county and state coverage. They do not establish the details of Minnesota’s current fluoridation law, including any requirements or exceptions.
For a legal or policy question, check the current Minnesota statutes and information from the state health department. Do not assume that a county coverage percentage, on its own, describes the rule for every water system in the county.
How can you check your water or remove fluoride?
First, identify your water supplier. A water bill, utility account or property manager can help you determine whether your address receives Minneapolis water or water from another system. If you use a private well, the Minneapolis utility report does not measure your well.
For a public supply, consult your own supplier’s latest drinking water report and look for its fluoride entry. Check the report year, the units, and whether the number is an average, a range or another type of result. A newer report may give a different picture from an older one.
For a result specific to your tap, ask a qualified drinking water laboratory about a fluoride test and follow its sample-collection instructions. The result describes the water in the sample you submit. Our guide to how to test water quality at home explains how to approach testing.
If you want to reduce fluoride, look for a treatment product independently certified for fluoride reduction. Reverse-osmosis systems can reduce fluoride; some other products may also have a fluoride-reduction claim. Check the certification for the exact model and follow its installation and replacement instructions.
Do not assume every pitcher or carbon filter removes fluoride. Compare the specific contaminants a model is certified to reduce when reviewing the best pitcher water filters.
Questions about fluoride
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the Minneapolis fluoride data come from?
The Minneapolis utility’s 2025 drinking water report is the source for the measured average and range. The CDC’s 2025 status report identifies the Minneapolis system and says it is fluoridated; it is a status source rather than the source of the measured average.
The separate CDC state and county dataset provides the 2020 public-water-system population percentages. For the most current information about your own supply, check your supplier’s latest report rather than assuming an older city or county figure still applies.
Frequently asked questions
Does boiling Minneapolis water remove fluoride?
No. Boiling does not remove dissolved fluoride and can increase its concentration as water evaporates.
Is ppm the same as mg/L for fluoride in drinking water?
For a dilute water sample, 1 part per million is approximately equal to 1 milligram per liter. The Minneapolis report uses ppm for its fluoride results.