Is There Fluoride in Miami Water?
No, not anymore: Miami’s utility reports that it discontinued adding fluoride, although naturally occurring fluoride may still be present in the water. The most useful distinction is between added fluoride, which the utility says it stopped, and fluoride that occurs naturally. For comparisons with other systems, see fluoride in tap water by city.
Does Miami add fluoride to its water?
No. The Miami-Dade utility’s 2025 water quality report says the Alexander Orr, Jr., John E. Preston, and Hialeah Water Treatment Plants stopped adding fluoride on June 6, 2025. The report attributes the change to a county resolution and Florida legislation.
Stopping fluoridation does not necessarily mean the water contains no fluoride: naturally occurring fluoride may remain. The historical measurement below predates the change and should not be treated as a current tap-water result.
How much fluoride was measured in Miami water?
For 2023, the state-reported operational fluoride level for the Miami-Dade Water and Sewer Authority main system averaged 0.7 milligrams per liter (mg/L). That figure is the mean of 12 monthly values, not a measurement taken after fluoride addition stopped. The CDC monthly-level report is the source for those historical readings.
| Measurement or standard | Fluoride level | Basis |
|---|---|---|
| Miami system annual mean | 0.7 mg/L | 2023 mean of 12 monthly values |
| Miami system monthly range | 0.65–0.75 mg/L | Lowest and highest reported monthly values in 2023 |
| US Public Health Service recommended level | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Non-enforceable secondary standard |
| EPA maximum contaminant level | 4.0 mg/L | Enforceable limit for public water systems |
The 2023 mean matched the recommended level for community water fluoridation and was below both EPA standards. Those comparisons describe the historical reading; they do not establish the fluoride concentration at a particular tap today. Ask the water provider for a more recent measurement or have your water tested if you need a current result.
How do Miami-Dade County and Florida compare?
In 2020, 98.1% of the population served by public water systems in Miami-Dade County received fluoridated water. The corresponding figure for Florida was 78.5%, according to the CDC’s state and county fluoridation data.
These figures describe populations served by public water systems, not every resident or individual water source. They are also from 2020, before the utility reported stopping fluoride addition in 2025. They do not establish the current status of other systems in the county or state.
What does Florida law say about water additives?
Florida law prohibits additives in public water systems that do not meet the statutory definition of a “water quality additive.” The law does not name fluoride. A Florida Senate bill analysis says the prohibition covers additives included primarily for health-related purposes.
The legislation is CS/CS/CS/SB 700, enacted as Chapter 2025-22. The enrolled bill text contains the provision, and the Florida Senate bill page lists its effective date as July 1, 2025. The Miami-Dade utility reported that its three named plants stopped adding fluoride before that effective date.
How can you check or remove fluoride from your water?
Start by identifying your water provider from your bill, or determine whether your home uses a private well. If your water comes from the Miami-Dade Water and Sewer Department, ask the utility for its latest fluoride measurement and the area or system it represents. A different provider or a private well may have a different result.
For a measurement at your tap, ask a certified drinking-water laboratory for a fluoride test and follow its sampling instructions. Our guide to how to test water quality at home explains the testing process. If you want to assess a filter, testing both unfiltered and filtered water can help you compare the results.
Reverse-osmosis systems and some activated-alumina filters can reduce fluoride. Check that the specific product is independently certified for fluoride reduction; a general filtration claim does not establish that it removes fluoride. For products to investigate, see our guide to the best pitcher water filters. Boiling is not a fluoride-removal method and can concentrate dissolved fluoride as water evaporates.
When to ask a professional
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the Miami fluoride information come from?
The discontinuation date comes from the utility’s 2025 water quality report. The historical concentration comes from state-reported monthly operational values, while the county and state percentages come from the CDC’s 2020 dataset. The Florida Senate documents provide the law’s text, effective date and bill analysis.
One source differs from the utility report: the CDC My Water’s Fluoride status report for 2025 lists the Miami-Dade main system as fluoridated. Because the utility report gives a specific discontinuation date for its plants, the answer above uses that report for the fluoridation status. Neither the historical mean nor the differing status entries provides a current measurement at your tap.
Frequently asked questions
Is 0.7 mg/L approximately the same as 0.7 parts per million?
Yes. For dilute substances in water, 0.7 mg/L is approximately 0.7 parts per million.
Can a fluoride test tell whether the fluoride was added?
A concentration result alone does not establish whether fluoride was added or occurred naturally. Ask the water provider about its treatment practices as well as its latest test results.