Is There Fluoride in Mesquite Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, the utility adds fluoride to Mesquite’s water, but its fluoride level is not reported.

Does Mesquite add fluoride to its water?

The CDC’s 2025 fluoridation status report lists the MESQUITE public water system, identified as TX0570014, as fluoridated. The fluoride product listed for the system is H2SiF6, also known as fluorosilicic acid.

That status refers to added fluoride, not just fluoride that occurs naturally in a water source. For comparisons with other communities, see fluoride in tap water by city.

A fluoridated status does not tell you how much fluoride is in a particular sample. To find a concentration, you need a water-quality result as well as the system’s status.

How much fluoride is in Mesquite water?

A measured fluoride concentration for Mesquite is not reported in the information available here. There is also no reported sampling year or measurement basis, such as an annual average or a range.

These national figures provide context, but none is a measured result for Mesquite:

ReferenceFluoride concentrationWhat it represents
US Public Health Service0.7 mg/LRecommended level for community water fluoridation
EPA secondary standard2.0 mg/LA federal secondary drinking-water standard
EPA maximum contaminant level4.0 mg/LAn enforceable federal limit for public water systems

The 0.7 mg/L figure is a recommendation, not a reported Mesquite measurement. The 2.0 mg/L and 4.0 mg/L figures are standards, not evidence that Mesquite’s water is at, above or below either level.

Ask the utility for its latest available fluoride results if you want to compare a measurement with those figures. Check whether the result is a single sample, a range or another summary, and note the year it covers.

How does Mesquite compare with Dallas County and Texas?

In 2020, 98.9% of the public water system population in Dallas County received fluoridated water. The corresponding figure for Texas was 71.0%, according to the CDC’s state and county fluoridation data.

Those percentages describe populations served by public water systems, not necessarily every resident or every water source. They also refer to 2020, while the Mesquite system status cited above is from 2025.

The county and state figures give context for how widespread fluoridation was; they do not provide Mesquite’s fluoride concentration. They also cannot establish which water system serves a particular address.

What are Texas law and policy on fluoridation?

The information available here does not establish Texas’s current law or policy on community water fluoridation. Mesquite’s reported status alone does not show whether fluoride addition is required statewide, decided locally or subject to another arrangement.

For a current explanation of applicable requirements, ask Texas drinking-water regulators or the water system serving your address. A utility’s fluoridation status and the laws governing that status are separate questions.

How can you check your water or remove fluoride?

First, confirm which public water system serves your address. Your water bill, property manager or local utility can help identify the supplier; a private well is not covered by a public water system’s status report.

Ask the supplier for its latest water-quality report and any available fluoride measurements. Look for the sampling date, the concentration in mg/L and whether the number represents an individual result or a summary. If no result is listed, ask the utility directly whether a more recent measurement is available.

For a measurement at your tap, use a laboratory that tests drinking water for fluoride and follow its sample-collection instructions. Our guide to how to test water quality at home explains ways to approach testing.

If you want to reduce fluoride, some reverse-osmosis and activated-alumina systems are designed for that purpose. Look for independent certification that specifically lists fluoride reduction; a general filter certification or a claim about another contaminant is not enough. The guide to the best pitcher water filters can help you compare pitcher options, but check each model’s specific reduction claims.

Follow the manufacturer’s maintenance instructions and consider testing the treated water to check the result. Boiling is not a fluoride-removal method: evaporation can increase the concentration remaining in the water.

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Where does the Mesquite fluoride data come from?

The city-specific status comes from the CDC’s 2025 My Water’s Fluoride status report for the MESQUITE public water system. The Dallas County and Texas percentages come from a separate CDC dataset for 2020.

These sources answer different questions: the status report identifies whether the named system is fluoridated, while the county and state dataset summarizes the share of public water system populations receiving fluoridated water. Neither source cited here supplies a measured Mesquite fluoride level.

Frequently asked questions

How does mg/L relate to parts per million in water?

For water, 1 mg/L is approximately equal to 1 part per million, or ppm.

Can a fluoride test tell whether the fluoride was added?

A concentration result measures the fluoride present but does not, by itself, distinguish naturally occurring fluoride from added fluoride. Information about the water source and treatment is needed for that distinction.