Is There Fluoride in Mesa Water?
Yes, fluoride is present in Mesa water: the measured mean was about 0.48 mg/L in 2012–2019, but whether the utility adds fluoride is not reported.
Is fluoride added to Mesa water?
The available measurements show fluoride in Mesa’s finished water, but they do not establish whether the utility adds it. Fluoride can occur naturally in water; its presence alone does not tell you whether a water system practices fluoridation.
The historical data also do not establish that all the fluoride measured in Mesa water was naturally occurring. For comparisons with other locations, see fluoride in tap water by city.
How much fluoride was measured in Mesa water?
The EPA’s historical compliance data include 110 finished-water samples for the City of Mesa system from 2012–2019. Fluoride was detected in 90 samples. The following measurements and reference levels use milligrams per liter, or mg/L.
| Measurement or reference level | Fluoride | Basis |
|---|---|---|
| Mesa detected-sample mean | 0.48 mg/L | Mean of detected finished-water compliance samples, 2012–2019 |
| Mesa maximum | 1.19 mg/L | Highest reported finished-water result, 2012–2019 |
| US Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Non-enforceable federal secondary standard |
| EPA maximum contaminant level | 4.0 mg/L | Enforceable federal drinking-water limit |
The 0.48 mg/L mean is based on samples in which fluoride was detected, not an average that includes every sample. The 1.19 mg/L maximum is a separate result, not the typical level at every Mesa tap.
Both historical Mesa figures are below the EPA’s 2.0 mg/L secondary standard and 4.0 mg/L limit. The maximum is above the 0.7 mg/L recommendation for community water fluoridation. These comparisons do not establish whether Mesa adds fluoride or determine current compliance.
What do the county and Arizona figures show?
Mesa is in Maricopa County, but a county-level fluoridation percentage is not established by the data cited here. A county figure would not, by itself, establish the policy or fluoride concentration for the City of Mesa water system.
In 2020, 57.7% of Arizona’s population served by public water systems received fluoridated water, according to CDC state and county fluoridation data. That is a statewide coverage figure, not a Mesa water measurement or confirmation that Mesa adds fluoride.
What are Arizona’s fluoride law and policy?
The sources cited here do not establish Arizona’s current law or policy on adding fluoride, or Mesa’s local policy. The state coverage figure is not a substitute for a statute or a utility’s current decision.
For a current policy answer, ask the City of Mesa water utility whether it adds fluoride and contact Arizona authorities about applicable state rules. Keep the policy question separate from the measured concentration: a test result alone cannot answer both.
How can I check my water or remove fluoride?
First, check your water bill to confirm your supplier. A Mesa mailing address does not necessarily identify the water utility serving a particular property. Ask your supplier for its latest water quality report and whether the report covers your address.
Look for the fluoride result, its units and the period when the water was sampled. Ask the supplier whether it adds fluoride if that distinction matters to you. A current report or a test is more useful for checking present conditions than the 2012–2019 historical mean.
For a result specific to your tap, ask a qualified laboratory about fluoride testing and follow its sample-collection instructions. Our guide to how to test water quality at home explains how to approach testing. A routine concentration test tells you how much fluoride is present, not whether the utility added it.
If you want to reduce fluoride, look for a reverse-osmosis system certified to NSF/ANSI 58 with a specific fluoride-reduction claim. Some pitcher filters may also have a fluoride-reduction certification, but do not assume every model does: check the exact product’s certification and follow its replacement instructions. See our guide to the best pitcher water filters when comparing models.
Who should ask about fluoride?
If you have questions about fluoride in your drinking water or your child’s drinking water, ask a dentist or doctor.
Where does this information come from?
The Mesa measurements come from the EPA Six-Year Review 4 compliance monitoring data, for the City of Mesa system, AZ0407095. They describe finished-water samples collected during 2012–2019, rather than a current measurement at an individual home.
The Arizona coverage percentage comes from the CDC’s Water Fluoridation Reporting System data for 2020. Neither historical dataset establishes whether Mesa currently adds fluoride.
Frequently asked questions
Does boiling Mesa water remove fluoride?
No. Boiling does not remove fluoride, and water lost through evaporation can increase the fluoride concentration in what remains.
Can I tell whether Mesa water contains fluoride by its taste?
Taste and appearance are not reliable ways to measure fluoride. A laboratory test can determine its concentration in a tap-water sample.