Is There Fluoride in Memphis Water?
Yes, Memphis Light, Gas, and Water adds fluoride; its reported average was about 0.56 mg/L in 2025.
For a comparison with other utilities, see fluoride in tap water by city. The Memphis figure is an average of reported monthly operational values, not a measurement from every household tap.
Does Memphis add fluoride to its water?
Yes. The CDC lists Memphis Light, Gas, and Water as fluoridated, with a status of Adjusted in its 2025 report. That means the utility adds fluoride rather than relying only on fluoride that occurs naturally in water.
The listing identifies the utility as Memphis Light, Gas, and Water, system ID TN0000450. If you receive water from a different supplier or use a private well, the Memphis utility’s status and measurements do not necessarily describe your water. Check your bill or ask your supplier if you are unsure which system serves your address.
How much fluoride is in Memphis water?
The state-reported operational fluoride level for Memphis averaged 0.56 mg/L in 2025, calculated as the mean of 12 monthly values. The lowest reported monthly value was 0.54 mg/L and the highest was 0.59 mg/L, also in 2025.
| Measure or standard | Fluoride level | Basis |
|---|---|---|
| Memphis average | 0.56 mg/L | 2025 mean of 12 monthly operational values |
| Memphis monthly range | 0.54–0.59 mg/L | Lowest and highest reported monthly values in 2025 |
| U.S. Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Non-enforceable secondary drinking-water standard |
| EPA maximum contaminant level | 4.0 mg/L | Enforceable drinking-water limit |
The Memphis 2025 average was below all three comparison values. The 0.7 mg/L figure is a recommendation for community water fluoridation; it is not the same kind of standard as the EPA’s 4.0 mg/L limit.
The reported average summarizes the year rather than showing the level on a particular day. It also does not, by itself, establish a current tap-water level or a regulatory compliance finding.
How does Memphis fit into Shelby County and Tennessee?
In 2020, the CDC reported that 100.0% of the population served by public water systems in Shelby County received fluoridated water. The corresponding figure for Tennessee was 88.8% of the population served by public water systems.
These are county and state context figures, not measurements of fluoride at the Memphis utility. They describe populations served by public systems, not every resident or private well. They also come from 2020, so they should not be read as current percentages or compared directly with the utility’s 2025 operational average.
What does Tennessee law say about fluoridation?
The CDC reports cited here identify Memphis’s utility status, but they do not establish whether Tennessee requires or prohibits fluoridation statewide. The utility’s adjusted status alone is not evidence of a statewide mandate.
For a current answer about state law or local policy, contact Tennessee’s drinking-water program or Memphis Light, Gas, and Water. Ask which policy applies to your specific water system, since a county-level percentage does not identify the policy of each individual supplier.
How can you check or remove fluoride in your own water?
Start by identifying your water supplier on your bill, then ask for its latest water-quality report and the reported fluoride level. Check the report’s year and whether its result is an average, a range or another type of measurement. The 2025 Memphis average is useful context, but a newer report can give a more recent system-level picture.
If you want a result for your own tap, ask a drinking-water laboratory for a fluoride test and follow its sampling instructions. Specify whether the sample will come from an untreated tap or from water that has passed through a filter. Our guide to how to test water quality at home covers the practical steps.
Reverse osmosis and distillation can reduce fluoride, but performance depends on the device and its maintenance. Check that a particular product is independently certified for fluoride reduction; do not assume that every pitcher or carbon filter removes it. See our guide to the best pitcher water filters and verify each model’s specific claims before buying.
Follow the manufacturer’s replacement and maintenance instructions. If you need to know what remains after treatment, a laboratory test of the filtered water can provide a tap-specific result. Boiling water does not remove fluoride and can concentrate it as water evaporates.
Who should ask for advice?
Anyone with questions about fluoride in drinking water should ask a dentist or doctor.
Where do these figures come from?
The CDC fluoridation status report identifies Memphis Light, Gas, and Water as fluoridated and adjusted in 2025. The CDC monthly fluoride levels report supplies the 12 monthly operational values used for the 2025 average and range.
The CDC state and county fluoridation dataset supplies the 2020 Shelby County and Tennessee population percentages. Its population figures serve a different purpose from the utility’s concentration measurements: they show how many public-system customers received fluoridated water, not how much fluoride was measured at a particular tap.
Frequently asked questions
Does the Memphis figure describe natural fluoride only?
No. The CDC’s 2025 listing identifies the Memphis utility’s status as adjusted, meaning the utility adds fluoride.
Is 0.56 mg/L a reading from every Memphis tap?
No. It is the mean of 12 state-reported monthly operational values for 2025, not a measurement from every household.
Does a Shelby County private well have the same fluoride level?
Not necessarily. The county percentage covers people served by public water systems, while the Memphis level describes the utility’s reported operational values.