Is There Fluoride in McKinney Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, McKinney’s utility adds fluoride, but its fluoride level is not reported in the available data.

Does McKinney add fluoride to its water?

McKinney is listed as fluoridated in the CDC’s 2025 Fluoridation Status Report. The report identifies the system as MCKINNEY, with public water system ID TX0430039.

The listed fluoride product is fluorosilicic acid, H₂SiF₆. This means the status refers to added fluoride, not merely fluoride that occurs naturally in a water source. For other locations, see fluoride in tap water by city.

A fluoridation status is not a measurement of the fluoride in a particular glass of water. The status tells you whether fluoride is added; a concentration result would tell you how much was measured in a sample.

How much fluoride is in McKinney water?

A measured fluoride concentration for McKinney is not reported in the available data. There is therefore no measured level, measurement year or sampling basis to compare with the following federal reference values.

Reference valueLevelWhat it represents
US Public Health Service recommendation0.7 mg/LRecommended fluoride level for community water fluoridation; not an enforceable federal limit
EPA secondary standard2.0 mg/LA non-enforceable federal secondary standard
EPA maximum contaminant level4.0 mg/LThe enforceable federal drinking-water limit

These numbers have different purposes. The 0.7 mg/L recommendation is not the same kind of standard as EPA’s 4.0 mg/L limit, and neither number establishes McKinney’s actual concentration.

To make a comparison, look for a current fluoride result from the water system and note whether the result is a single sample, an average or a range. Without that information, the reported fluoridation status cannot show whether a measured level is above or below any of these values.

How does McKinney fit into Collin County and Texas?

In CDC state and county data for 2020, 99.9% of the public-water-system population in Collin County received fluoridated water. The corresponding figure for Texas was 71.0% of the state’s public-water-system population.

Those percentages describe populations served by public water systems, not necessarily every resident or every water source in the county or state. They are also coverage figures, not measurements of fluoride concentration.

The county and state figures are from 2020; the McKinney system status is from 2025. The figures provide context but do not establish a 2025 percentage for Collin County or Texas.

What does Texas law say about water fluoridation?

The available information does not establish a Texas law or policy on whether community water systems must add fluoride. The CDC coverage figures and McKinney’s reported status should not be treated as proof of a statewide mandate.

The federal reference values above also do not, by themselves, answer whether Texas requires McKinney to add fluoride. For current policy, ask the Texas drinking-water program or McKinney’s utility what rules apply to your water system.

How can you check your water or remove fluoride?

First, confirm which water system serves your address. Your water bill or provider can help you identify it; the McKinney system ID is TX0430039. A countywide percentage cannot identify the fluoride status or concentration at an individual address.

Ask your provider for its latest drinking-water quality report and look for the fluoride result. Check the report’s sampling year and whether the number is an average, a range or another type of result. If the report does not give enough detail, ask the utility how and where the sample was collected.

For a result from your own tap, use a test that specifically measures fluoride or ask a laboratory to test a sample. Follow the laboratory’s collection instructions and check that the result is reported in mg/L so you can compare it with the reference values above. Our guide to how to test water quality at home covers the testing process.

If you want to reduce fluoride, look for a reverse-osmosis or distillation unit with an independently verified fluoride-reduction claim. A filter should explicitly list fluoride reduction: a general water-filter claim does not establish that it removes fluoride. Check the manufacturer’s maintenance and replacement instructions, too.

Some pitchers may have a verified fluoride-reduction claim, but not every pitcher filter does. When comparing the best pitcher water filters, check the specific model and replacement cartridge for that claim before buying.

Where does this information come from?

The 2025 CDC Fluoridation Status Report identifies McKinney’s fluoridation status and public water system ID. The CDC’s 2020 state and county dataset supplies the Collin County and Texas coverage percentages.

Neither a coverage percentage nor a yes-or-no system status is a substitute for a measured concentration. A current utility report or a fluoride-specific test is the place to look for a level, its date and the basis of the result.

Who should ask about fluoride?

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Frequently asked questions

Does boiling water remove fluoride?

No. Boiling does not remove fluoride and can concentrate it as water evaporates.

Does a chlorine-reduction claim mean a filter removes fluoride?

No. Check the specific filter and replacement cartridge for an independently verified fluoride-reduction claim.

What does mg/L mean on a fluoride test result?

It means milligrams of fluoride per liter of water, a unit used to report concentration.