Is There Fluoride in McAllen Water?
No fluoride is added; McAllen water contains natural fluoride only, averaging about 0.53 mg/L in detected finished-water samples from 2012–2019.
Is there fluoride in McAllen water?
Yes, natural fluoride has been measured in McAllen water, but the CDC’s 2025 fluoridation status report lists McAllen as not fluoridated. Natural fluoride in water is not the same as fluoride added for community water fluoridation.
The report identifies the system as McAllen, with public water system ID TX1080006. For comparisons with other utilities, see fluoride in tap water by city.
How much fluoride was measured in McAllen water?
EPA compliance-monitoring data show a mean of 0.53 mg/L and a maximum of 0.67 mg/L in McAllen finished-water samples from 2012–2019. Fluoride was detected in all 16 samples in that dataset. Finished water is water that has been treated and is ready for distribution; these figures are not measurements from every household tap.
| Measure or benchmark | Fluoride level | Basis |
|---|---|---|
| McAllen measured mean | 0.53 mg/L | Mean of detected finished-water compliance samples, 2012–2019 |
| McAllen measured maximum | 0.67 mg/L | Highest finished-water compliance sample, 2012–2019 |
| US Public Health Service recommended level | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Federal secondary drinking-water standard |
| EPA maximum contaminant level | 4.0 mg/L | Enforceable federal drinking-water limit |
The historical McAllen mean and maximum were both below all three benchmarks. The 0.7 mg/L recommendation is a target for systems that fluoridate, not a statement that McAllen adds fluoride. EPA’s 2.0 mg/L secondary standard and 4.0 mg/L maximum contaminant level are different types of benchmarks.
The EPA figures summarize samples collected over several years; they do not establish the level at a particular tap today. A newer utility report or a tap-water test can give you a more recent result.
How does McAllen compare with Hidalgo County and Texas?
In 2020, 27.8% of the Hidalgo County population served by public water systems received fluoridated water, compared with 71.0% of the Texas population served by public water systems. These figures come from the CDC’s state and county fluoridation data.
The percentages describe populations served by public water systems, not the percentage of fluoride in the water. They also do not establish the fluoride level at a McAllen address. The county and state figures are from 2020, while McAllen’s cited status report is from 2025, so they are not a same-year comparison.
What does Texas law say about water fluoridation?
The sources cited here do not establish whether Texas requires or prohibits community water fluoridation. The county and state percentages describe reported coverage; they do not themselves explain the legal policy behind each system’s decision.
McAllen’s reported status applies to its identified public water system. It should not be read as a statement that every Texas utility has the same fluoridation status.
How can you check your tap water or remove fluoride?
Start by checking the public water system named on your water bill. If it is McAllen Public Utility, look for its latest consumer confidence report and check the fluoride result, sampling dates and units. If another system serves your address, ask that utility for its report instead.
For a result specific to your tap, ask a certified water-testing laboratory about fluoride testing and follow its sampling instructions. Our guide to how to test water quality at home explains how to approach a household test. A historical utility average is useful context, but it cannot substitute for a current sample from your tap.
If you want to reduce fluoride, consider reverse osmosis, distillation or a filter specifically certified for fluoride reduction. Check the product’s certification and instructions: not every pitcher filter is designed to reduce fluoride. Compare the manufacturer’s stated reduction claim and replacement schedule when considering the best pitcher water filters.
Who should ask a professional?
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the McAllen fluoride data come from?
The status information comes from CDC’s 2025 report for McAllen’s public water system. The county and state percentages come from CDC’s 2020 population coverage data and describe public water system customers, rather than measurements from individual taps.
The measured mean and maximum come from EPA’s Six-Year Review 4 compliance-monitoring data for 2012–2019. That dataset includes 16 finished-water samples for McAllen Public Utility, identified as TX1080006. The measurements are historical, so check with the utility for its latest published information.
Frequently asked questions
Does boiling McAllen water remove fluoride?
No. Boiling does not remove fluoride and can concentrate it as water evaporates.
Can I compare mg/L with parts per million on a water report?
For dilute drinking water, a result in mg/L is approximately equal to the same numerical value in parts per million.