Is There Fluoride in Massachusetts Water?
Yes, for most residents: 57.8% of people on Massachusetts community water systems received fluoridated water in 2020. That statewide figure does not establish whether any particular city or water utility fluoridates its water. For comparisons elsewhere, see fluoride in tap water by city.
How much of Massachusetts water is fluoridated?
In 2020, 57.8% of the Massachusetts community water system population received fluoridated water, according to the CDC’s community water fluoridation data. The percentage describes people served by those systems, not the percentage of water samples containing fluoride.
It is also a statewide figure for that year, not a current result for every utility. A local system’s practices can differ from the statewide picture, so the percentage cannot tell you the status of your tap water. People using private wells are not represented as customers of community water systems in this figure.
Fluoride can occur naturally in source water. Its presence alone does not establish that a utility adds fluoride or practices fluoridation. To understand your own supply, look for both the utility’s fluoridation status and a reported fluoride concentration.
What is Massachusetts law on water fluoridation?
The statewide percentage does not establish what Massachusetts law requires or whether a particular fluoridation decision is made by state or local officials. It also does not establish the policy currently followed by your water supplier.
For an answer about current requirements, ask the Massachusetts Department of Public Health or your water utility. If you want to know about a particular city, ask whether its supplier adds fluoride and where that decision is documented. A utility’s current practice and the law governing that practice are separate questions.
How can you check your city or water utility?
Start by identifying the supplier named on your water bill. If your bill comes from a property manager or another party, ask for the name of the utility that supplies the building. A city name alone may not identify the supplier or the source of water at a particular address.
Look for the utility’s latest consumer confidence report, sometimes called an annual drinking water quality report. Search it for “fluoride” and note the reported concentration, the sampling year and any range shown. The report may also describe whether fluoride is naturally present or added. If its wording is unclear, ask the utility to explain it.
When contacting the utility, give your service address and ask whether it adds fluoride to that supply. Also ask for its most recent fluoride result and the date and location of sampling. A utility report describes the water it monitors; it is not necessarily a measurement taken at your tap.
If you use a private well, ask a qualified laboratory about testing the water directly. Our guide to how to test water quality at home explains ways to approach testing. A result is most useful when the report identifies fluoride, its concentration in milligrams per liter and the date the sample was taken.
If you are considering a filter, check the specific product’s certification or documentation for a fluoride reduction claim; do not assume every pitcher removes it. See our guide to the best pitcher water filters and verify the claim for the exact model you are considering.
What do the fluoride levels mean?
The following numbers are reference points, not measured Massachusetts fluoride concentrations. Compare a local result with each number according to what that number represents.
| Level | What it represents |
|---|---|
| 0.7 mg/L | The US Public Health Service’s recommended level for community water fluoridation. It is a recommendation, not the federal maximum limit. |
| 2.0 mg/L | The EPA’s secondary standard for fluoride. Secondary standards are federal guidelines rather than federally enforceable limits. |
| 4.0 mg/L | The EPA’s federally enforceable maximum contaminant level for fluoride. |
The recommended level, secondary standard and maximum limit serve different purposes, so they should not be treated as interchangeable. None tells you whether your supplier adds fluoride or what concentration was measured in your water. Use a dated local report or a test result for that information.
When should you ask a professional?
If you have questions about fluoride in your water, ask a dentist or doctor; seek medical advice if you are concerned about an exposure.
Where does the Massachusetts data come from?
The statewide percentage comes from the CDC’s Water Fluoridation Reporting System, published through its state and county community water fluoridation dataset. It describes the Massachusetts community water system population receiving fluoridated water in 2020; it does not provide a current measurement for your address.
The local information to look for is more specific: the supplier’s name, whether it adds fluoride, and a dated concentration from its report or a water test. Keep the year and the population or sampling basis with any figure you find, so a statewide percentage is not mistaken for a local test result.
Frequently asked questions
Does boiling tap water remove fluoride?
No. Boiling does not remove fluoride and can increase its concentration as water evaporates.
Can you tell how much fluoride is in water by its taste?
Taste is not a reliable way to determine fluoride concentration. Check a dated utility report or have the water tested.