Is There Fluoride in Maryland Water?
Yes, for most residents: 93.7% of people on community water systems in Maryland received fluoridated water in 2020. That statewide figure does not establish whether a particular address receives fluoridated water today. For comparisons beyond Maryland, see fluoride in tap water by city.
How much of Maryland’s water is fluoridated?
The 2020 figure describes the percentage of people served by community water systems, not the percentage of water sources, utilities or all Maryland residents. It is a measure of population coverage rather than a fluoride concentration.
The figure also does not identify the water supply at an individual address. A statewide percentage cannot establish whether a particular utility adjusts fluoride or what its water contains now.
Fluoride can occur naturally in water. Finding naturally occurring fluoride in a sample does not, by itself, establish that a water system practices fluoridation by adjusting the fluoride level.
What is Maryland’s fluoridation law or policy?
The statewide coverage figure does not establish what Maryland law requires or whether any particular utility must adjust fluoride. It should not be read as proof that every Maryland water system follows the same policy.
For current requirements, ask Maryland’s drinking water authorities about the rules that apply to your supply. Your utility can also explain its own practices, including whether it adds fluoride and how it reports the amount in its water.
How can you find out about your city or utility?
Start by identifying the water supplier for your address. The name may appear on your water bill; if you do not receive a bill directly, ask your landlord, building manager or local government which utility serves the property.
Ask the utility whether it adds fluoride and request its latest drinking water quality report, also called a consumer confidence report. Look for fluoride in the results and check the report’s year, the units and whether the value is a range, an average or another type of result.
A city name alone may not be enough to identify your supply, particularly if an address is served by a different local utility. If the report does not make your service area or the fluoride result clear, give the utility your address and ask which reported results apply.
If you use a private well, the community water system percentage does not tell you what is in your water. Ask a laboratory that analyzes fluoride how to collect and submit a sample, and contact your local health department for help finding testing information. Our guide explains how to test water quality at home.
A tap sample can help you learn about the water at that location, but check the test’s units and sampling instructions before comparing a result with a standard. If you use a filter, check whether it is independently certified for fluoride reduction; not every filter is designed to reduce fluoride. See the best pitcher water filters for features to consider.
What do the fluoride levels mean?
Fluoride concentrations are commonly expressed in milligrams per liter (mg/L). The following numbers are benchmarks, not measurements of Maryland’s water:
| Benchmark | Level | What it represents |
|---|---|---|
| US Public Health Service recommendation | 0.7 mg/L | The recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | A secondary standard that is not federally enforceable |
| EPA maximum contaminant level | 4.0 mg/L | An enforceable limit for public water systems |
These numbers serve different purposes. The recommended level for community water fluoridation is not the same as the EPA’s enforceable maximum contaminant level.
The statewide coverage figure does not report a measured fluoride concentration, so it cannot be compared numerically with these benchmarks. When reviewing a utility report, use its stated year and sampling basis; a single home sample alone does not determine a utility’s regulatory compliance.
Where does the data come from?
The statewide coverage figure comes from the CDC’s community water fluoridation state and county data, based on its Water Fluoridation Reporting System. The figure cited here is for 2020 and describes people served, rather than a concentration measured at a tap.
A utility’s current report is a more useful starting point for an address-specific answer. Ask the supplier to clarify its fluoride practice and results if the report does not answer your question.
When should you ask a dentist or doctor?
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Frequently asked questions
Does the Maryland coverage percentage include private wells?
No. The 2020 percentage describes people served by community water systems, so it does not establish the fluoride content of a private well.
Does fluoride found naturally in water mean a utility adds it?
No. Fluoride can occur naturally, and a test result alone does not show whether a utility adds it.
Can the statewide percentage tell me the fluoride level at my tap?
No. It is a population coverage figure, not a fluoride concentration. Check your utility’s report or arrange a fluoride test for your water.