Is There Fluoride in Louisiana Water?

DetoxWater Editorial Team•Published November 5, 2026

Partly: 38.0% of people on Louisiana community water systems received fluoridated water in 2020.

That statewide figure does not tell you the fluoride level at a particular address or whether a particular utility adds fluoride. For comparisons with other locations, see fluoride in tap water by city.

How much of Louisiana’s water is fluoridated?

In 2020, 38.0% of people served by Louisiana community water systems received fluoridated water, according to CDC reporting data. The figure describes the share of people served, not the share of the state’s water supply by volume.

It is also a statewide figure from 2020, not a current result for every utility. It does not establish that water received by everyone outside that group contained no fluoride. Fluoride can occur naturally in water, and detecting it does not by itself show that a utility added it.

The percentage does not cover every possible source of drinking water. If your home uses a private well rather than a community water system, the statewide community-system figure does not tell you the fluoride concentration in that well.

What is Louisiana’s law or policy on water fluoridation?

The available state-level information does not establish Louisiana’s current law or policy on adding fluoride to drinking water. The 2020 percentage reports how many people on community water systems received fluoridated water; it does not, on its own, show whether a state rule requires, permits or restricts fluoride addition.

To check the policy that applies to your supply, ask your water utility whether it adds fluoride and what policy or decision governs that practice. A utility’s answer about its own operation should not be treated as an answer for every system in Louisiana.

How can you find the fluoride level for your city or utility?

Start by identifying the water provider for your address. Its name is usually on your water bill; a landlord, property manager or local government may also be able to identify it. A city name alone may not be enough if more than one system serves the surrounding area.

Ask the provider for its latest annual drinking water quality report, also called a Consumer Confidence Report. Look for fluoride in the list of detected substances, then check the reporting year, sampling period and units. A report may give an average, a range or both, so note the basis before comparing its result with a standard.

If the report does not answer your question, ask the utility for its latest fluoride result for your service area and whether it adds fluoride. Also ask which source or sampling location the result represents. A reported concentration alone does not establish whether the fluoride was naturally present or added.

For a private well, a water test can give you a result specific to that supply. Our guide to how to test water quality at home explains ways to arrange testing; make sure the test you choose includes fluoride.

If you are considering a filter, check its certification and product documentation for a specific fluoride-reduction claim. Not every pitcher is designed to reduce fluoride; our guide to the best pitcher water filters can help you compare products.

What do the fluoride levels and standards mean?

Fluoride concentrations are commonly reported in milligrams per liter, written as mg/L. The following numbers serve different purposes and are not measurements of Louisiana water:

LevelWhat it represents
0.7 mg/LThe U.S. Public Health Service recommended level for community water fluoridation.
2.0 mg/LThe EPA’s non-enforceable secondary standard for fluoride.
4.0 mg/LThe EPA’s enforceable maximum contaminant level for fluoride in public drinking water.

The recommended level is not the same as either EPA standard. When comparing a utility result with these numbers, check the result’s year and whether it is a single sample, an average or a range. A statewide percentage cannot be converted into a fluoride concentration for your tap.

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Where does the Louisiana data come from?

The statewide percentage comes from the CDC’s Community Water Fluoridation State and County Level data, which reports water fluoridation information for Louisiana. The figure cited here is the 2020 share of people on community water systems receiving fluoridated water.

That source is useful for understanding the statewide picture at the time, but it does not provide a current measured fluoride level for your individual tap in the information cited here. For an address-specific answer, use the relevant utility’s report or a fluoride test of the water source. Keep the source, year and measurement basis with any result you use.

Frequently asked questions

Can you see fluoride in drinking water?

No. You cannot reliably determine whether water contains dissolved fluoride by looking at it; check a water report or use a test that measures fluoride.

Does boiling water remove fluoride?

No. Boiling does not remove dissolved fluoride and can increase its concentration as water evaporates.