Is There Fluoride in Los Angeles Water?
Yes, the utility adds fluoride; its state-reported operational level averaged about 0.76 mg/L in 2023.
Is fluoride added to Los Angeles water?
Los Angeles is listed as an adjusted system, meaning fluoride is added rather than the reported status reflecting natural fluoride alone. The CDC fluoridation status report listed City Of Los Angeles, system CA1910067, as fluoridated and adjusted in 2025.
That city-system listing does not describe every water system in Los Angeles County. For comparisons with other places, see fluoride in tap water by city.
How much fluoride is in Los Angeles water?
The reported 2023 operational level was a mean of three monthly values, not a full-year average or a measurement from every tap. The CDC monthly fluoride report is the source for those state-reported values.
| Measure or standard | Fluoride level | Basis |
|---|---|---|
| Los Angeles reported mean | 0.76 mg/L | Mean of three monthly operational values reported for 2023 |
| Los Angeles reported range | 0.75–0.77 mg/L | Lowest and highest of those three monthly operational values in 2023 |
| US Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Federal secondary, non-enforceable standard |
| EPA maximum contaminant level | 4.0 mg/L | Federally enforceable drinking-water limit |
The 2023 mean was slightly above the recommended community fluoridation level and below both EPA standards. The recommendation is a target for fluoridated systems; it is not the same kind of standard as the EPA limit. The three monthly values also do not establish what the level was in unreported months.
How do Los Angeles County and California compare?
The CDC county and state data show the share of people served by public water systems who received fluoridated water in 2020:
| Area | Share receiving fluoridated water | Year and population basis |
|---|---|---|
| Los Angeles County | 68.0% | 2020 public water system population |
| California | 57.5% | 2020 public water system population |
These percentages describe coverage, not the fluoride concentration in a particular system. They also do not establish whether each system adds fluoride or has naturally occurring fluoride. The county figure is not a substitute for the City Of Los Angeles system's status or its reported measurements.
What does California law say about fluoridation?
The CDC system listing describes the reported status of City Of Los Angeles; it does not explain what California law requires of that system or of other suppliers. The county and state coverage figures likewise do not establish a legal requirement.
For current rules that apply to a particular water system, ask the supplier or the California State Water Resources Control Board's Division of Drinking Water. Identify the supplier by name, because a Los Angeles County address alone does not identify the water system.
How can I check or remove fluoride at home?
Start with the name of the supplier on your water bill and request its latest water quality report. Ask whether the report includes fluoride results for your service area, what period the results cover and whether fluoride is added. If your water comes from a building's shared supply, the property manager may be able to identify the supplier.
For a result from your own tap, use a drinking-water laboratory accredited to test for fluoride. Ask for its sample container and follow its collection instructions; the lab can explain how to interpret the result in mg/L. Our guide to how to test water quality at home covers the practical steps.
If you want to reduce fluoride, look for a filter independently certified to reduce fluoride specifically. Reverse osmosis systems and some activated alumina filters can reduce it, but a filter's general certification or its claim to reduce other substances does not establish fluoride reduction. Check the model's performance data sheet and follow its cartridge replacement instructions.
Pitcher filters vary, so check the fluoride claim for the exact model and cartridge before buying; see our guide to the best pitcher water filters. If you want to verify the result at your tap, ask a laboratory about testing the filtered water.
Who should I ask about fluoride?
If you have questions about fluoride in your drinking water or your individual circumstances, ask a dentist or doctor.
Where does the data come from?
The city status and operational measurements come from separate CDC My Water's Fluoride reports linked above: the status report is from 2025, while the three reported monthly measurements are from 2023. The county and California percentages come from the CDC's 2020 public water system population data.
The dates and measures serve different purposes. Use the supplier's latest report or a tap test for a more local, recent result; neither the county coverage percentage nor the earlier city mean tells you the exact concentration at your faucet today.
Frequently asked questions
Does boiling water remove fluoride?
Boiling is not a reliable way to remove fluoride. As water evaporates, fluoride can become more concentrated in the water left behind.
Does a conventional water softener remove fluoride?
A conventional ion-exchange water softener is not designed to remove fluoride. Look for a treatment system with an independently certified fluoride-reduction claim.
Is the reported Los Angeles average a result from my faucet?
No. It is the mean of three reported monthly operational values from 2023, not a sample from your individual tap.