Is There Fluoride in Lincoln Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, Lincoln’s utility adds fluoride; its finished-water compliance samples had a measured mean of 0.92 mg/L in 2012–2019.

Does Lincoln add fluoride to its water?

Lincoln, Nebraska, is listed as fluoridated in the CDC’s 2025 Fluoridation Status Report. The report identifies the system as LINCOLN, CITY OF, with public water system ID NE3110926.

That designation means more than a finding of naturally occurring fluoride: Lincoln’s utility adds fluoride. For comparisons with other systems, see fluoride in tap water by city.

The CDC status and the EPA measurements answer different questions. The status report identifies Lincoln as fluoridated in 2025; the measurements describe fluoride detected in earlier finished-water samples. Neither is a current reading from an individual tap.

How much fluoride is in Lincoln water?

The EPA’s Six-Year Review 4 compliance data show a measured mean of 0.92 mg/L for detected finished-water samples from Lincoln during 2012–2019. Fluoride was detected in all 102 samples, and the maximum measured result was 1.04 mg/L during that period.

Measure or standardFluoride levelBasis
Lincoln measured mean0.92 mg/LMean of detected finished-water compliance samples, 2012–2019
Lincoln measured maximum1.04 mg/LHighest finished-water compliance sample result, 2012–2019
US Public Health Service recommendation0.7 mg/LRecommended level for community water fluoridation
EPA secondary standard2.0 mg/LNon-enforceable secondary drinking-water standard
EPA limit4.0 mg/LEnforceable maximum contaminant level

Lincoln’s historical measured mean and maximum were above the recommended 0.7 mg/L level and below both EPA standards. The recommendation is not the same kind of number as the EPA limit: it is a target for community water fluoridation, while 4.0 mg/L is the maximum contaminant level.

The 0.92 mg/L figure is a historical mean, not a guarantee that water at every Lincoln address has that concentration. Ask the utility for its latest water-quality report if you want a more recent system-wide figure.

How does Lancaster County compare with Nebraska?

In 2020, 97.1% of Lancaster County’s public-water-system population received fluoridated water, compared with 73.8% statewide in Nebraska. These figures come from the CDC’s state and county fluoridation data.

The percentages describe people served by public water systems, not necessarily every resident. The Lancaster County figure is county context; it is not a measurement of fluoride in Lincoln’s water or a substitute for the Lincoln utility’s status.

What is Nebraska’s fluoride law or policy?

The fluoridation records cited here do not establish Nebraska’s state law or statewide policy. Lincoln’s reported status should not be treated as proof that every Nebraska system adds fluoride or that a particular legal requirement applies to every system.

For a question about a specific address, start with the water provider serving it. A provider’s name and system ID help distinguish its records from county-wide figures.

How can I check or remove fluoride from my water?

First, identify your water source. If you receive water from Lincoln’s utility, ask for its latest consumer confidence report and look for fluoride results and the dates of the samples. If you use a private well or another provider, Lincoln’s utility data do not establish the fluoride level at your tap.

For an address-specific result, ask a laboratory that tests drinking water whether it offers fluoride analysis and follow its sampling instructions. Our guide to how to test water quality at home explains how to approach a water test. Check what a test actually measures before relying on it for fluoride.

If you want to reduce fluoride, consider a treatment system with an independently certified fluoride-reduction claim. Reverse-osmosis systems are one option; some pitcher filters also make a specific fluoride-reduction claim. Check the exact model and certification rather than assuming every filter removes fluoride, and follow the manufacturer’s replacement instructions. See our guide to the best pitcher water filters.

If you want to check a filter’s performance at your address, ask a drinking-water laboratory about testing water before and after treatment. Keep the results and sampling dates so you can distinguish your tap results from the utility’s historical average.

Who can answer personal questions?

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Where does the Lincoln fluoride data come from?

The CDC’s 2025 status report identifies whether the Lincoln public water system is fluoridated. The EPA’s 2012–2019 compliance dataset supplies the measured mean, maximum and sample count for that system’s finished water.

The separate CDC county and state dataset supplies the 2020 population percentages. Its coverage figures provide context, but they do not report the concentration measured at a particular Lincoln tap.

Frequently asked questions

Does boiling Lincoln water remove fluoride?

No. Boiling does not remove fluoride and can concentrate it as water evaporates.

Does every pitcher filter remove fluoride?

No. Check whether the exact filter model has an independently certified fluoride-reduction claim.

Is 0.92 mg/L a reading from every Lincoln tap?

No. It is the mean of detected finished-water compliance samples collected during 2012–2019, not a current measurement at every tap.