Is There Fluoride in Lexington Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, Lexington’s utility adds fluoride; the measured mean in detected finished-water compliance samples was about 0.84 mg/L during 2012–2019.

The measurement is a historical average, not a current reading from every Lexington tap. For comparisons with other systems, see fluoride in tap water by city.

Does Lexington water have added fluoride?

Yes. The CDC’s 2025 Fluoridation Status Report lists KENTUCKY-AMERICAN WC, public water system KY0340250, as fluoridated. The utility adds fluoride; this is not just a report of naturally occurring fluoride.

A system’s fluoridation status and its measured concentration answer different questions. The status identifies whether the system is fluoridated, while sample results show how much fluoride was measured in the water at particular times.

How much fluoride was measured in Lexington water?

The EPA’s Six-Year Review 4 compliance monitoring data include 49 finished-water samples for KENTUCKY-AMERICAN WATER CO, KY0340250, from 2012–2019. Fluoride was detected in all 49 samples. The mean below is calculated from those detected samples, and the maximum is the highest result among them.

Measure or referenceFluoride levelBasis
Measured mean0.84 mg/LDetected finished-water compliance samples, 2012–2019
Measured maximum1.21 mg/LHighest finished-water compliance sample, 2012–2019
US Public Health Service recommended level0.7 mg/LRecommended level for community water fluoridation
EPA secondary standard2.0 mg/LNon-enforceable secondary standard
EPA maximum contaminant level4.0 mg/LEnforceable drinking-water limit

The 2012–2019 measured mean was above the 0.7 mg/L recommended level and below both EPA standards. The maximum in that historical sample set was also below the two EPA standards. These results alone do not establish a current concentration or a current compliance determination.

Milligrams per liter, abbreviated mg/L, describes the concentration of fluoride in water. The mean summarizes the detected results over the reporting period; it does not mean every sample had the same concentration.

How does Lexington compare with Fayette County and Kentucky?

The CDC’s county and state fluoridation data report that 100.0% of Fayette County’s public water system population received fluoridated water in 2020. The corresponding figure for Kentucky was 99.9% in 2020.

Those percentages describe populations served by public water systems, not necessarily every resident or every water source. They are context for Lexington, not measurements of fluoride concentration at an individual address. They also refer to 2020, whereas the CDC system-status report cited above is from 2025.

What does Kentucky law say about fluoride in water?

The CDC and EPA records cited here report fluoridation status, population coverage and measurements; they do not establish the current requirements of Kentucky law. For the rules that apply to a particular system, ask the water provider or Kentucky’s drinking-water agency.

A statewide coverage percentage should not be used on its own to determine what the law requires. Likewise, a system’s reported status does not explain every policy that may apply to it.

How can you check your water or remove fluoride?

Start by identifying your water supplier on your bill or asking your building manager. If your water comes from KY0340250, request its latest annual water quality report and look for the fluoride result, the sampling year and how the result is expressed. A more recent report may give you a better picture than the historical 2012–2019 dataset.

If you use a private well, the public-system results do not establish its fluoride concentration. A laboratory can test a sample from your own water source; ask for a fluoride test and follow its collection instructions. Our guide to how to test water quality at home explains ways to check your water.

To reduce fluoride, look for a treatment unit independently certified for fluoride reduction, such as a qualifying reverse-osmosis system or activated-alumina filter. Check the certification for the specific model and follow its maintenance and replacement instructions. A filter’s ability to reduce other substances does not by itself establish that it reduces fluoride; see our guide to the best pitcher water filters and check each model’s certification.

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Where does this information come from?

The system’s reported fluoridation status comes from the CDC’s 2025 report. The county and state coverage figures come from a separate CDC dataset for 2020, and the concentration figures come from EPA compliance monitoring records for 2012–2019.

Because the sources cover different years and measures, they should not be treated as a single current tap-water test. Use the latest report from your own supplier or a fluoride test of your water when you need information specific to your address.

Frequently asked questions

Does boiling water remove fluoride?

No. Boiling does not remove fluoride and can concentrate it as water evaporates.

Can you tell whether water contains fluoride by taste?

Taste is not a reliable way to determine whether water contains fluoride. Check a water quality report or have the water tested.