Is There Fluoride in Kentucky Water?
Yes, for most residents: 99.9% of people on Kentucky community water systems received fluoridated water in 2020.
That statewide figure does not tell you the fluoride concentration at a particular address or whether the water supply has changed since then. For other locations, see fluoride in tap water by city.
How much of Kentucky’s water is fluoridated?
In 2020, 99.9% of Kentucky’s population served by community water systems received fluoridated water, according to the CDC’s state and county fluoridation data. The figure describes people served by those systems, not the percentage of individual water samples or utilities with a particular fluoride concentration.
It also is not a measure of every Kentucky resident’s water source. People using private wells are outside the community-water-system population counted in that figure. A statewide percentage cannot establish the fluoride concentration in an individual well.
Fluoride can occur naturally in source water. Finding fluoride in a water sample does not, by itself, establish that a utility adds fluoride or that the water has been fluoridated by the utility.
What is Kentucky’s law or policy on fluoridation?
The statewide coverage statistic does not, by itself, identify a Kentucky law requiring fluoridation or establish what current state policy says. Check Kentucky statutes and regulations or ask the state drinking water program for the current requirements.
A utility can explain whether it adds fluoride and how it manages the water it supplies. Its practices, however, do not necessarily describe the rules or practices for every other utility in Kentucky.
How can you find out about your city or water utility?
Start by identifying the supplier for your address. Your water bill may name the utility; if you do not receive the bill directly, ask your landlord, property manager or the person responsible for the account. A city name alone may not be enough to identify the supplier for a particular property.
Next, look for the utility’s latest annual drinking water report, often called a consumer confidence report. Search the report for fluoride and note the reporting period, the concentration and the units. The report may present a range or a representative result rather than a separate measurement for your home.
If the report does not answer your question, contact the utility. Ask whether it adds fluoride, what fluoride concentration it most recently reported and whether that result applies to your service area. If the report lists fluoride but does not explain its source, ask whether it is naturally occurring, added or both.
For a private well, check any existing well test records and consider a laboratory test that specifically includes fluoride. Our guide to how to test water quality at home explains ways to approach testing. Make sure the method you choose measures fluoride rather than assuming a general water test covers it.
If you are considering a filter, check the exact model’s certification and instructions for a fluoride-reduction claim; not every pitcher filter is certified for fluoride reduction. You can also compare best pitcher water filters.
What do the fluoride levels and standards mean?
Fluoride concentrations in drinking water are commonly reported in milligrams per liter, written as mg/L. The following national reference points are standards or recommendations, not measured Kentucky levels:
| Reference point | Fluoride level | Meaning |
|---|---|---|
| U.S. Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Non-enforceable federal guideline |
| EPA maximum contaminant level | 4.0 mg/L | Enforceable federal limit for regulated public water systems |
These numbers serve different purposes. In particular, the recommended fluoridation level is not the same as the EPA’s enforceable limit. Compare a utility’s reported result with the appropriate reference point, and check the report’s year and whether the result is an average, range or another type of measurement.
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the Kentucky data come from?
The statewide coverage figure comes from the CDC’s Water Fluoridation Reporting System data linked above. Its Kentucky figure is for 2020 and describes the population served by community water systems that received fluoridated water; it is not a current measurement at every tap.
The national reference points come from the U.S. Public Health Service recommendation and EPA drinking water standards. For a local answer, use those alongside a recent report from the utility serving your address or a fluoride test result for your private well.
Frequently asked questions
Does the statewide figure include people using private wells?
No. The 2020 figure describes people served by community water systems, not people using private wells.
Can fluoride be present without a utility adding it?
Yes. Fluoride can occur naturally in source water, so its presence alone does not show that a utility adds it.
Does boiling water remove fluoride?
No. Boiling does not remove fluoride and can increase its concentration as water evaporates.