Is There Fluoride in Kansas Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, for most residents, because 65.4% of people on Kansas community water systems received fluoridated water in 2020.

That statewide figure does not establish whether fluoride is added to your particular water supply or how much fluoride it contains. For a wider look at local supplies, see fluoride in tap water by city.

How much of Kansas’s water is fluoridated?

In 2020, 65.4% of people served by Kansas community water systems received fluoridated water, according to CDC reporting. The percentage describes people served, not the percentage of water systems or the volume of water produced.

It is also a historical statewide figure. It does not establish the current status of every utility, and it cannot tell you the fluoride concentration at a particular address. A local report or test is needed for that information.

The statistic covers people on community water systems, so it should not be applied to every Kansas resident. For example, it does not tell a private well owner what is in their well water.

Fluoride can occur naturally in water. Finding fluoride in a sample does not, by itself, establish that a utility adds it or that the supply is classified as fluoridated.

What is Kansas’s fluoridation policy?

The CDC coverage figure does not establish Kansas’s statewide law or policy on adding fluoride to drinking water. It also does not show what decision has been made for any particular utility.

For current state policy, ask the Kansas Department of Health and Environment. For the status of a specific supply, ask the utility that serves it. Keep the two questions separate: a statewide population percentage is not a substitute for either a policy statement or a local water report.

How can I find out about my city or utility?

Start with your water bill or the name of your water provider. Contact the utility and ask whether it adds fluoride, whether fluoride occurs naturally in its source water, and where you can find its latest fluoride results.

Request the annual drinking water quality report, sometimes called a consumer confidence report. When you find a fluoride result, check the year and what the result represents, such as a sample or an average. If the utility serves more than one area or uses more than one source, ask which information applies to your address.

A reported concentration tells you how much fluoride was measured; it does not by itself tell you whether that fluoride was naturally present or added. The utility may be able to explain the source and whether it adjusts the fluoride level.

If you use a private well, contact a laboratory that can test drinking water for fluoride and ask for its sample-collection instructions. General information on how to test water quality at home can help you plan the process, but check that the test you choose actually measures fluoride.

If you want to reduce fluoride, check a filter’s specific certification and product information: not every pitcher filter is designed to remove it. Our guide to the best pitcher water filters can help you compare options.

What do the fluoride levels mean?

Fluoride concentrations are commonly reported in milligrams per liter (mg/L). These three federal numbers have different purposes:

LevelMeaning
0.7 mg/LThe US Public Health Service’s recommended level for community water fluoridation. It is a recommendation, not the federal maximum limit.
2.0 mg/LThe EPA’s secondary standard, a nonenforceable federal guideline.
4.0 mg/LThe EPA’s enforceable maximum contaminant level for public drinking water systems.

None of these numbers is a measured Kansas statewide concentration. To compare a local result with them, first make sure the result is also expressed in mg/L and check its year and sampling basis. Ask your utility or testing laboratory if the report’s terminology is unclear.

Where does the Kansas data come from?

The CDC’s community water fluoridation dataset reports the Kansas percentage for 2020 using water fluoridation reporting data. Its statewide population measure is useful for describing coverage, but it is not a measurement of fluoride at an individual tap.

The comparison numbers come from the US Public Health Service recommendation and EPA drinking water standards. A utility report or a laboratory result is the appropriate source for a particular supply’s measured concentration.

Who can answer personal questions about fluoride?

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Frequently asked questions

Can fluoride be present in water without being added?

Yes. Fluoride can occur naturally in a water source, so its presence alone does not prove that a utility added it.

Does boiling water remove fluoride?

No. Boiling does not remove fluoride, and evaporation can concentrate what remains in the water.