Is There Fluoride in Kansas City Water?
Yes, the Kansas City, Missouri, utility adds fluoride, and its state-reported operational level averaged about 0.7 mg/L in 2025.
Is fluoride added to Kansas City water?
Yes. The CDC fluoridation status report for 2025 identifies the Kansas City, Missouri, public water system as fluoridated. The reported fluoride product is H2SiF6, also called fluorosilicic acid.
That status means the utility adds fluoride; it is not a finding that the water contains only naturally occurring fluoride. For a broader comparison, see fluoride in tap water by city.
The report identifies the Missouri system as KANSAS CITY, with public water system ID MO1010415. It should not be used to assume the status of a different provider or of Kansas City, Kansas.
How much fluoride is in Kansas City water?
The state-reported operational fluoride level for Kansas City averaged approximately 0.7 mg/L in 2025. That figure is the mean of monthly values, rather than a measurement from an individual household tap.
The CDC monthly fluoride level report contains 24 monthly values across two rows for the system in 2025. Those reported monthly values ranged from 0.65 mg/L to 0.75 mg/L; the two rows should not be interpreted as 24 separate months in one year.
| Measure or standard | Fluoride level |
|---|---|
| Kansas City mean of reported monthly operational values, 2025 | 0.7 mg/L |
| Kansas City lowest reported monthly value, 2025 | 0.65 mg/L |
| Kansas City highest reported monthly value, 2025 | 0.75 mg/L |
| U.S. Public Health Service recommended level for community water fluoridation | 0.7 mg/L |
| EPA secondary standard | 2.0 mg/L |
| EPA maximum contaminant level | 4.0 mg/L |
The 2025 operational mean is the same numerical value as the U.S. Public Health Service recommendation and below both EPA standards. The 2.0 mg/L secondary standard is not federally enforceable; the 4.0 mg/L maximum contaminant level is an enforceable federal limit for public drinking water systems.
An annual operational mean does not establish the fluoride concentration at every tap or at every moment. For a particular address, check the provider and, if needed, arrange a tap-water test.
How does Kansas City compare with county and state figures?
The CDC state and county fluoridation dataset gives a different kind of measure: the percentage of the public water system population receiving fluoridated water. These are 2020 figures, not measurements of fluoride concentration or the Kansas City utility’s 2025 status.
| Area | Public water system population receiving fluoridated water, 2020 |
|---|---|
| Cass County | 65.9% |
| Clay County | 48.5% |
| Clinton County | 100.0% |
| Jackson County | 60.9% |
| Platte County | 27.8% |
| Missouri | 72.2% |
The county percentages describe populations served by public water systems in each county, not necessarily every resident or every water provider. They do not tell an individual household whether its own supply is fluoridated. Check the named provider for that address rather than relying on the county figure.
What does Missouri law say about fluoridation?
The CDC reports describe fluoridation status, reported levels and population coverage. They do not establish whether Missouri law requires or restricts community water fluoridation.
Check current Missouri law and the water provider’s policy separately if you need to know what rules apply. The fact that Kansas City reports adding fluoride does not, by itself, establish a statewide mandate. A state-level population percentage also cannot answer that legal question.
How can you check or remove fluoride from your water?
Start with your water bill or ask your landlord to identify the provider. If it is Kansas City, Missouri, look for the system ID MO1010415 in the provider’s water-quality information. If another system serves your address, request its latest consumer confidence report and ask whether it adds fluoride and what level it reports.
For an address-specific measurement, use a laboratory that tests drinking water for fluoride. Ask the laboratory about its sampling instructions and reporting units before collecting a sample. Our guide to how to test water quality at home explains how to approach water testing.
To reduce fluoride, look for a treatment device independently certified for fluoride reduction, such as a suitable reverse-osmosis system or a cartridge with a specific fluoride-reduction claim. Check the certification for the exact model and follow its maintenance and replacement instructions. Not every pitcher filter removes fluoride; the best pitcher water filters guide can help you compare options, but verify the claim for the individual filter.
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the fluoride data come from?
The Kansas City status and operational figures come from CDC My Water’s Fluoride reports for Missouri in 2025. The status report identifies the utility, while the monthly-level report provides the values used for the mean and range above.
The county and Missouri percentages come from the CDC’s 2020 state and county dataset. Because the datasets use different years and measures, the percentages should not be treated as a substitute for the utility’s measured level. The federal reference values are the U.S. Public Health Service recommendation and EPA drinking water standards.
Frequently asked questions
Does boiling Kansas City water remove fluoride?
Boiling does not reliably remove fluoride. As water evaporates, the fluoride left behind can become more concentrated.
Can you tell how much fluoride is in water by tasting it?
Taste is not a reliable way to determine the fluoride concentration. A drinking-water laboratory can test a sample.