Is There Fluoride in Jacksonville Water?

DetoxWater Editorial Team•Published November 5, 2026

No fluoride is added: Jacksonville’s water contains natural fluoride only, reported at about 0.84 mg/L in an undated CDC natural-systems report.

Is there fluoride in Jacksonville water?

Yes. The distinction is between fluoride occurring naturally in the water and fluoride added during treatment: Jacksonville’s reported status is no added fluoride, not fluoride-free water.

The CDC natural-systems report identifies the JEA: Major Grid system and lists its natural fluoride level. For comparisons with other communities, see fluoride in tap water by city.

A separate CDC fluoridation-status report for 2025 lists JEA: Major Grid as fluoridated. That historical status may no longer reflect current conditions following Florida’s 2025 law, so it should not be treated as confirmation that fluoride is currently added.

How much fluoride is in Jacksonville water?

The CDC natural-systems report lists Jacksonville’s JEA: Major Grid natural fluoride level as 0.84 mg/L. The report does not give a year for that level; it was retrieved on November 3, 2026. An undated system-level figure cannot establish the concentration at a particular tap today.

FigureFluoride concentrationBasis
Jacksonville reported level0.84 mg/LNatural fluoride in JEA: Major Grid; measurement year not stated
US Public Health Service recommendation0.7 mg/LRecommended level for community water fluoridation
EPA secondary standard2.0 mg/LNon-enforceable secondary drinking water standard
EPA maximum contaminant level4.0 mg/LEnforceable primary drinking water limit

The undated reported natural level is above the recommended fluoridation level and below both EPA standards. These figures have different purposes: the Public Health Service number is a recommendation for systems that fluoridate, while the EPA numbers are drinking water standards.

The comparison does not mean Jacksonville adds fluoride to reach the recommended level. Nor does an undated figure show whether a new sample from a specific address would have the same concentration.

What do the county and state figures show?

CDC data for 2020 reported that 99.2% of the population served by public water systems in Duval County received fluoridated water. The corresponding figure for Florida was 78.5% of its public-water-system population.

Those figures describe countywide and statewide public-water-system populations, not a measurement from Jacksonville’s JEA: Major Grid. They also predate Florida’s 2025 law and should not be used as current percentages or as evidence that fluoride is now added in Jacksonville.

What does Florida law say?

Florida’s CS/CS/CS/SB 700 became Chapter 2025-22 and took effect on July 1, 2025, except where the act provides otherwise. It prohibits additives in public water systems that do not meet the statutory definition of a water quality additive.

The law does not name fluoride. The Florida Senate’s bill analysis says the provision excludes additives used primarily for health-related purposes. The statutory text and analysis are linked below so readers can check their wording directly.

How can you check your water or remove fluoride?

Start by confirming which water system serves your address. A utility bill or the utility itself can help identify the system; a private well is not represented by the JEA: Major Grid report.

Ask your provider for its latest water quality report and any available fluoride results, including the sampling date and the area represented. If you want a result for your own tap or well, ask an accredited drinking water laboratory for a fluoride test and follow its sampling instructions. Our guide explains how to test water quality at home.

To reduce fluoride, look for a treatment device specifically certified for fluoride reduction. Reverse-osmosis systems are one option; check the model’s certification and instructions rather than assuming every filter removes fluoride. If you are considering a countertop option, compare the claims for individual models in our guide to the best pitcher water filters.

Follow the manufacturer’s replacement schedule, and consider testing treated water to check the result. Boiling is not a fluoride-removal method: evaporation can concentrate substances left in the water.

When should you ask a professional?

Ask a dentist or doctor if you have questions about fluoride in your drinking water.

Where does the data come from?

The CDC Natural Systems Report lists the undated natural fluoride level for JEA: Major Grid. The separate CDC Fluoridation Status Report records the system’s 2025 status; these reports describe different aspects of the water.

The CDC state and county dataset is the source for both 2020 population percentages. It covers public water systems, so its county and state figures are broader than the Jacksonville system figure.

For the law, the Florida Senate bill page gives the chapter and effective date. The enrolled bill text contains the statutory language, and the Senate bill analysis explains the additive provision.

Frequently asked questions

What does mg/L mean on a fluoride report?

It means milligrams of fluoride per liter of water, a unit used to express concentration.

Can you tell whether water contains fluoride by looking at it?

No. A water report or a fluoride-specific test is needed to determine the concentration.