Is There Fluoride in Indianapolis Water?
Yes, Indianapolis adds fluoride to its water, and the utility reported an average of 0.57 mg/L in 2025.
Does Indianapolis add fluoride to its water?
The CDC’s fluoridation status report lists Citizens Water-Indianapolis as fluoridated in 2025. That means the utility adds fluoride; it is not a classification based only on fluoride that occurs naturally in water.
Fluoride can also occur naturally in a water source. The reported average does not tell you how much of the fluoride was naturally present and how much was added. For comparisons with other communities, see fluoride in tap water by city.
How much fluoride is in Indianapolis water?
The 2025 Citizens Water Quality Report reports an average fluoride concentration of 0.57 mg/L. The table compares that measured average with federal reference levels.
| Measure | Fluoride level | Basis |
|---|---|---|
| Indianapolis utility report | 0.57 mg/L | Average reported for 2025 |
| US Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Federal secondary standard |
| EPA maximum contaminant level | 4.0 mg/L | Enforceable federal limit |
The utility’s reported average is below all three reference levels. They serve different purposes: the US Public Health Service figure is a recommendation for community water fluoridation, while the EPA maximum contaminant level is an enforceable drinking-water limit. The EPA secondary standard is a non-enforceable federal standard.
An average is not a reading from every tap at every moment. Comparing the reported average with these figures also does not, by itself, determine regulatory compliance.
What do Marion County and Indiana figures show?
In 2020, 100% of Marion County’s population served by public water systems received fluoridated water. The corresponding figure for Indiana was 92.4%. Both figures come from CDC state and county fluoridation data.
These are coverage figures, not fluoride concentrations. They describe the share of people served by public water systems who received fluoridated water; they do not describe everyone in the county or state, including people who rely on private wells.
The county and state figures also do not replace the Indianapolis utility report. Use the utility’s report for its measured level and the CDC figures for broader geographic context.
Does Indiana law require water fluoridation?
The available data do not establish whether Indiana law requires community water fluoridation. The coverage percentages and the Indianapolis utility’s status show what was reported for those locations and years; they do not, on their own, establish a statewide legal requirement.
For a current answer about state requirements, consult Indiana’s current law or contact the state drinking-water program. Your water provider can answer questions about its own fluoridation practices.
How can you check your water or remove fluoride?
First, identify your water provider from your bill or by asking the utility that serves your address. Request its latest water quality report and look for the fluoride entry. The Indianapolis average may not describe a different provider’s water or a private well.
For an address-specific result, ask an accredited laboratory about a fluoride test and follow its sampling instructions. A home test may also be an option if it specifically measures fluoride; see how to test water quality at home for a starting point.
If you want to reduce fluoride, reverse osmosis, distillation and some specialized filters can do so. Check that the exact product is certified for fluoride reduction and follow its maintenance and replacement instructions. Not every pitcher or carbon filter removes fluoride; our guide to the best pitcher water filters can help you compare options.
Boiling water does not remove fluoride and can concentrate it as water evaporates. If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the information come from?
The Indianapolis fluoridation status comes from the CDC’s 2025 system report, and the measured average comes from Citizens’ 2025 water quality report, both linked above. The county and state percentages come from the CDC’s 2020 public-water-system coverage data.
Those sources answer different questions: whether the Indianapolis system is fluoridated, what average the utility reported, and how widely fluoridated water was supplied across the county and state. For your own address, the current report from your provider—or a test of your water—is more specific than a county percentage.
Frequently asked questions
Does 0.57 ppm mean the same as 0.57 mg/L in water?
Yes. For drinking water, 0.57 parts per million is approximately 0.57 milligrams per liter.
Can you tell how much fluoride is in water by looking at it?
No. A fluoride measurement requires a suitable test; clear water does not establish its fluoride concentration.