Is There Fluoride in Indiana Water?
Yes, for most residents: 92.4% of people on community water systems in Indiana received fluoridated water in 2020. That statewide figure does not identify the fluoride level in your own tap water.
For comparisons beyond Indiana, see fluoride in tap water by city.
How much of Indiana's water is fluoridated?
In 2020, 92.4% of people served by Indiana community water systems received fluoridated water. The percentage describes people on those systems, not every Indiana resident or every water source in the state.
It is also a snapshot from 2020, not a measurement of the fluoride concentration at a particular address. A statewide percentage cannot tell you whether your current supplier fluoridates its water or what concentration it reports.
Fluoride can occur naturally in a water source. Water fluoridation means adjusting the fluoride concentration; finding natural fluoride in water does not, by itself, mean the supplier adds it.
What is Indiana's law or policy on fluoridation?
The statewide percentage does not establish whether Indiana law requires fluoridation or what policy applies to a particular community. It should not be used as proof of a statewide mandate or of a decision by your local supplier.
For a current answer about a specific system, ask the utility whether it adjusts fluoride and where to find its policy or water-quality information. If you need to understand a statewide requirement, check the current Indiana rules with the appropriate state drinking-water office.
A policy and a test result answer different questions: a policy may describe how a system is managed, while a reported concentration tells you what was measured during a particular reporting period.
How can you check your city or water utility?
Start by identifying the water supplier on your bill or asking your landlord or property manager. Then look for the supplier's annual drinking-water quality report, also called a Consumer Confidence Report. You can ask the utility for a copy if you cannot find it.
Find the entry for fluoride and check the reporting period, units, and whether the number is an average, a range, or another type of result. If the report covers more than one water source or service area, ask which results apply to your address. A utility can also tell you whether it adds fluoride or whether the reported fluoride is naturally occurring.
If your home uses a private well, the statewide community-system percentage does not describe that well. Ask a drinking-water laboratory about a fluoride test and its sampling instructions. Our guide to how to test water quality at home explains how to approach testing.
If you are considering a filter, do not assume every pitcher removes fluoride. Check the model's independent certification and manufacturer specifications for fluoride reduction; our guide to the best pitcher water filters can help you compare options.
What do the fluoride levels mean?
Fluoride concentrations are commonly reported in milligrams per liter of water, written as mg/L. The following numbers have different purposes; they are not interchangeable.
| Level | What it represents |
|---|---|
| 0.7 mg/L | The US Public Health Service recommended level for community water fluoridation. |
| 2.0 mg/L | The EPA secondary standard for fluoride, a non-enforceable federal guideline. |
| 4.0 mg/L | The EPA maximum contaminant level for fluoride in public drinking water systems. |
The 0.7 mg/L recommendation is not the same as the EPA's enforceable maximum. A result above 0.7 mg/L does not by itself establish a violation of the 4.0 mg/L maximum. If a report is unclear about its units or how a result was calculated, ask the utility or laboratory before comparing it with these figures.
Where does the Indiana data come from?
The 2020 statewide percentage comes from the CDC's community water fluoridation state and county data, based on its Water Fluoridation Reporting System. It reports the share of Indiana's public water system population receiving fluoridated water.
The dataset supports the statewide percentage, but it does not supply a measured fluoride concentration for your tap in the information summarized here. For a local concentration, use a report from the system serving your address or a laboratory result for your own water. Check the date and basis of that result so you know what period and source it represents.
Who can answer personal questions about fluoride?
If you have questions or concerns about fluoride in your drinking water, ask a dentist or doctor.
Frequently asked questions
Can a renter find the water supplier without a water bill?
Ask the landlord, property manager, or building owner for the supplier's name and the relevant water-quality report.
Does boiling water remove fluoride?
No. Boiling can reduce the amount of water while leaving fluoride behind, potentially increasing its concentration.
Can a utility's reported fluoride concentration change over time?
Yes. A reported result describes the water tested during a particular period, so check the date and contact the utility for current information.