Is There Fluoride in Huntsville Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, Huntsville Utilities adds fluoride to its water; its reported average was about 0.66 mg/L in 2025.

Is fluoride added to Huntsville water?

Huntsville Utilities is listed as fluoridated, with an “adjusted” status, in the CDC’s 2025 fluoridation status report. That means fluoride is added to the water; the listing is not just a report of naturally occurring fluoride.

The listing identifies Huntsville Utilities as public water system AL0000882. If you want to compare it with other locations, see fluoride in tap water by city.

How much fluoride is in Huntsville water?

The reported Huntsville Utilities level was about 0.66 mg/L in 2025, calculated as the mean of state-reported monthly operational values. It is an average across reported values, not a measurement from every tap.

Measurement or benchmarkFluoride levelBasis
Huntsville UtilitiesAbout 0.66 mg/LMean of reported monthly operational values in 2025
US Public Health Service recommendation0.7 mg/LRecommended level for community water fluoridation
EPA secondary standard2.0 mg/LSecondary drinking-water standard
EPA maximum contaminant level4.0 mg/LEnforceable drinking-water limit

The Huntsville Utilities average was slightly below the Public Health Service recommendation and below both EPA standards. The recommendation and standards are benchmarks, not measurements of Huntsville water.

The CDC’s 2025 monthly-level report contains 47 reported monthly values across four reporting rows for Huntsville Utilities. Those values ranged from 0.2 to 0.8 mg/L in 2025. The 47 values are not 47 months in one year; they come from multiple reporting rows.

A simple mean of reported values does not necessarily represent a water-volume-weighted average. It also cannot tell you the fluoride level at your tap at a particular time.

How does Huntsville compare with Madison County and Alabama?

The CDC’s county and state figures describe the share of the public water system population receiving fluoridated water. They are context for Huntsville, not measurements of the fluoride concentration at a Huntsville tap.

AreaPublic water system population receiving fluoridated waterYear
Madison County98.2%2020
Alabama77.7%2020

Both figures come from the CDC’s state and county fluoridation data. They cover public water system populations, so they should not be read as percentages of all residents. They also refer to 2020, while the Huntsville Utilities status and level figures above refer to 2025.

What does Alabama law say about fluoridation?

The sources cited here do not establish whether Alabama law requires, permits or restricts community water fluoridation. Huntsville Utilities’ “adjusted” status alone does not establish a statewide mandate.

For a current answer about state requirements or local decisions, contact Alabama drinking-water regulators or Huntsville Utilities. Ask specifically about the public water system serving your address, rather than assuming a county-wide percentage describes your supply.

How can I check my water or remove fluoride?

First, confirm who supplies your address. A Huntsville address does not by itself establish that Huntsville Utilities is your water provider. Your water bill or the utility can help you identify the system; the Huntsville Utilities system number in the CDC report is AL0000882.

Ask your provider for its latest drinking-water report and any more recent fluoride results. Check the reporting year and whether a number is an average, a range or a single sample. An older system-wide result may not describe the water at your tap today.

For a tap-specific result, use a laboratory that tests drinking water for fluoride. Ask about its accreditation, sampling instructions and reporting limits before collecting a sample. Our guide to how to test water quality at home explains what to consider when choosing a test.

If you want to reduce fluoride, look for a filter independently certified for fluoride reduction. Reverse osmosis systems and some other filters can be certified for that purpose, but certification for a different contaminant does not establish fluoride reduction. Check the exact model’s certification and follow its maintenance and replacement instructions.

Pitchers differ in what they remove. When comparing the best pitcher water filters, verify that the specific model is certified for fluoride reduction rather than assuming every pitcher removes it. A laboratory test of filtered water can help you check the result at your tap.

If you are unsure what fluoride exposure is appropriate for you, ask a dentist or doctor.

Where does this information come from?

The Huntsville Utilities status comes from the CDC’s 2025 Fluoridation Status Report. The reported level comes from the CDC’s 2025 Average Fluoride Levels by Month report, using the state-reported operational values for system AL0000882.

The Madison County and Alabama percentages come from the CDC’s state and county dataset for 2020. The years and scopes differ: the county and state figures describe fluoridation coverage, while the utility report supplies Huntsville Utilities’ status and reported levels. For current conditions at a specific address, check the provider’s latest information or arrange a tap-water test.

Frequently asked questions

Does boiling Huntsville water remove fluoride?

No. Boiling does not remove fluoride and can concentrate it as water evaporates.

What does mg/L mean on a fluoride report?

It means milligrams per liter. In dilute water, 1 mg/L is approximately equal to 1 part per million.