Is There Fluoride in Henderson Water?
Yes, Henderson’s utility adds fluoride, and its finished-water samples had a measured mean of about 0.72 mg/L in 2012–2019.
Does Henderson add fluoride to its water?
Henderson adds fluoride rather than relying only on naturally occurring fluoride. The fluoride product reported for Henderson is fluorosilicic acid, H₂SiF₆.
The CDC’s My Water’s Fluoride report listed HENDERSON CITY OF, public water system NV0000076, as fluoridated in 2025. That designation describes the utility’s fluoridation status; it does not by itself give the current concentration at every tap.
For a broader comparison, see fluoride in tap water by city. Other water systems may have different sources, treatment practices and reported levels.
How much fluoride was measured in Henderson water?
The EPA’s Six-Year Review 4 compliance monitoring data include 662 finished-water samples for Henderson from 2012–2019. Fluoride was detected in all 662 samples. The mean below is the mean of detected samples; the maximum is the highest result in that set.
| Measure or standard | Fluoride level | Basis |
|---|---|---|
| Henderson measured mean | 0.72 mg/L | Detected finished-water compliance samples, 2012–2019 |
| Henderson measured maximum | 0.81 mg/L | Finished-water compliance samples, 2012–2019 |
| U.S. Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Non-enforceable secondary drinking-water standard |
| EPA maximum contaminant level | 4.0 mg/L | Enforceable drinking-water limit |
Henderson’s historical measured mean was close to the Public Health Service recommendation and below both EPA standards. The historical maximum was also below both EPA standards.
These results describe samples collected during 2012–2019, not a continuous reading or a measurement from your tap today. A current utility report or a test of your water is a better way to check a more recent level.
How does Henderson compare with Clark County and Nevada?
The CDC’s state and county fluoridation data give context for the public water system population in 2020:
| Area | Public water system population receiving fluoridated water | Year |
|---|---|---|
| Clark County | 98.2% | 2020 |
| Nevada | 76.4% | 2020 |
These percentages describe people served by public water systems, not necessarily every resident. The Clark County figure is county context, not a separate fluoride measurement for Henderson’s utility.
The county and state percentages also do not show the fluoride concentration in an individual household’s water. For that, look for the relevant water system’s results or arrange a test.
What does Nevada law say about fluoridation?
Henderson’s reported fluoridation status does not establish what Nevada law requires statewide. The county and state percentages likewise do not show whether a particular policy requires, permits or restricts fluoridation.
To check current legal requirements, consult Nevada statutes or ask the utility which rules apply to its water system. Keep the legal question separate from the historical sample results: a measured concentration is not, by itself, a statement of state policy.
How can you check or remove fluoride from your water?
Start with your water provider’s latest water-quality report. Confirm that the report covers the system serving your address, then look for fluoride results, their units and the sampling period. If you are unsure which system serves you, ask the provider named on your water bill.
For a result from your own tap, use a laboratory that tests drinking water for fluoride. Ask the lab for its sampling instructions and containers before collecting the sample. Our guide to how to test water quality at home explains how to approach home testing.
If you want to reduce fluoride, look for a treatment system independently certified for fluoride reduction. Reverse osmosis, distillation and some activated alumina systems can reduce fluoride, but performance depends on the product and its maintenance. Not every pitcher or carbon filter is designed to remove it; check the specific model’s certification and replacement instructions. See the best pitcher water filters for options to investigate.
If you install a filter, testing water before and after treatment can help you check the result at your tap. Follow the laboratory’s instructions for collecting each sample.
When should you ask a professional?
If you have questions about fluoride in your drinking water, ask a dentist or doctor. They can help you consider your individual circumstances.
Where does the Henderson fluoride information come from?
The utility’s reported fluoridation status comes from the CDC’s 2025 My Water’s Fluoride report. The measured mean, maximum and sample counts come from the EPA’s 2012–2019 finished-water compliance data for the same named public water system.
The Clark County and Nevada percentages come from the CDC’s 2020 state and county dataset. The CDC reports describe fluoridation status and population coverage, while the EPA data provide the historical sample measurements. Check the dates and the water system named in any newer report before comparing results.
Frequently asked questions
Does boiling water remove fluoride?
No. Boiling does not remove fluoride and can concentrate it as water evaporates.
What does mg/L mean on a water report?
It means milligrams per liter, a unit used to report the concentration of a substance in water.