Is There Fluoride in Hayward Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, the utility adds fluoride; Hayward’s water had a reported average fluoride level of 0.7 mg/L in 2025. For comparisons with other locations, see fluoride in tap water by city.

Does Hayward add fluoride to its water?

Hayward’s water is fluoridated, rather than being reported as containing only naturally occurring fluoride. The CDC lists the City of Hayward water system as fluoridated in its 2025 status report and classifies it as “Consecutive.”

That status describes the water system; it does not, by itself, identify the point at which fluoride is added. The system’s identification number in the CDC report is CA0110006, which can help distinguish it from other water systems when checking the record.

How much fluoride is in Hayward water?

Hayward’s 2025 annual water quality report gives an average fluoride concentration of 0.7 mg/L. The report expresses that figure as 0.7 parts per million, which is approximately equivalent to 0.7 mg/L in water.

MeasureFluoride levelBasis
Hayward water0.7 mg/LAverage reported in the utility’s 2025 water quality report
US Public Health Service recommendation0.7 mg/LRecommended level for community water fluoridation
EPA secondary standard2.0 mg/LNonenforceable secondary drinking water standard
EPA maximum contaminant level4.0 mg/LEnforceable drinking water limit

The utility’s reported 2025 average matches the recommended level for community water fluoridation and is below both EPA standards. The recommendation is a target for systems that fluoridate water; it is not the same type of number as the enforceable EPA limit.

An annual average summarizes reported results rather than promising an identical concentration at every tap. For a result specific to your home, a separate test is the more direct way to check.

How does Hayward compare with Alameda County and California?

The CDC’s 2020 data show that 97.9% of the public water system population in Alameda County received fluoridated water. The corresponding California figure was 57.5% in 2020.

These percentages describe people served by public water systems, not the percentage of all residents or all water systems. The county figure is regional context, not a separate measurement of fluoride in Hayward’s water. Likewise, the state figure does not determine the fluoride status of an individual address.

What is California’s fluoride law or policy?

The CDC coverage figures show how much of the public water system population received fluoridated water; they do not establish what California law requires. We found no information on a specific California fluoridation law or policy in these sources.

A statewide coverage percentage also should not be read as a statement that every California water system follows the same practice. For Hayward specifically, the relevant status is the CDC’s 2025 listing for the City of Hayward system.

How can you check your water or remove fluoride?

First, confirm which water system serves your address. Hayward’s utility report and CDC status record apply to the City of Hayward system; they are not a substitute for checking the source serving a property with a different supplier or a private well.

To measure fluoride at your tap, ask a qualified drinking water laboratory for a fluoride test and follow its sampling instructions. Our guide to how to test water quality at home explains how to approach home water testing. Keep the result with its sampling date so you can distinguish it from the utility’s annual average.

If you want to reduce fluoride, reverse osmosis and distillation are options. Filter performance depends on the product: look for an independently certified fluoride-reduction claim for the specific model, and follow its installation and replacement instructions. Do not assume that every activated-carbon filter or pitcher removes fluoride; compare the claims in our guide to the best pitcher water filters.

A laboratory test before and after filtration can show what is happening at your own tap. Ask a dentist or doctor if you have questions about fluoride in your drinking water.

Where does the information come from?

The Hayward 2025 Annual Water Quality Report is the source of the utility’s reported average fluoride level. Look for the fluoride row in the report when reviewing the measurement.

The CDC’s 2025 fluoridation status report lists the City of Hayward system as fluoridated and gives its “Consecutive” status. The status report and the utility’s water quality report provide different kinds of information: one identifies the system’s status, while the other reports a concentration.

The CDC state and county fluoridation dataset is the source for the 2020 Alameda County and California coverage percentages. Those figures describe coverage across public water system populations rather than a concentration measured at a particular tap.

Frequently asked questions

Does boiling Hayward water remove fluoride?

No. Boiling does not remove fluoride and can concentrate it as water evaporates.

Are ppm and mg/L the same in a water report?

For dilute drinking water, 1 part per million is approximately equal to 1 mg/L.