Is There Fluoride in Greensboro Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, Greensboro’s utility adds fluoride; its state-reported operational level averaged about 0.72 mg/L in 2024.

That answer applies to the Greensboro public water system, not necessarily every water source at an address in the area. For comparisons with other systems, see fluoride in tap water by city.

Is fluoride added to Greensboro water?

Yes. The CDC’s 2025 fluoridation status report lists the Greensboro public water system, identified as NC0241010, as fluoridated with an “adjusted” status. That means its fluoride level is adjusted by the utility; the listing is not merely a statement that fluoride occurs naturally in the water.

The status report identifies the system rather than the water supply at each individual address. If you are unsure whether your home receives Greensboro utility water, check your water bill or ask your supplier.

How much fluoride is in Greensboro water?

The CDC’s 2024 monthly fluoride report contains state-reported operational values for Greensboro. The mean was about 0.72 mg/L, calculated from 17 monthly values across two report rows. Those reported monthly values ranged from 0.55 mg/L to 0.89 mg/L in 2024.

Measurement or standardFluoride level
Greensboro’s 2024 operational mean of 17 monthly values0.72 mg/L
US Public Health Service recommended level for community water fluoridation0.7 mg/L
EPA secondary standard2.0 mg/L
EPA maximum contaminant level4.0 mg/L

Greensboro’s 2024 operational mean was close to the recommended 0.7 mg/L level and below both EPA standards. The recommendation is not a legal maximum; the secondary standard is non-enforceable, while the maximum contaminant level is an enforceable drinking-water limit.

The 2024 mean is a summary of reported operational values, not a measurement from every household tap. It also should not be used on its own to establish compliance with an EPA limit.

How does Greensboro compare with Guilford County and North Carolina?

In 2020, 98.5% of Guilford County residents served by public water systems received fluoridated water, compared with 87.9% of North Carolina residents served by public water systems statewide, according to the CDC’s state and county data.

These percentages describe populations served by public water systems, not all residents, and they do not establish the fluoride status of a private well. They also describe 2020 rather than the current share of residents receiving fluoridated water. The county figure is context for the area, not a separate measurement of Greensboro’s utility water.

Does North Carolina law require fluoridation?

The sources cited here do not identify a North Carolina law or statewide policy requiring community water fluoridation. Greensboro’s “adjusted” status describes that public water system; it does not by itself establish a statewide requirement.

The statewide percentage shows how much of the public-water-system population received fluoridated water in 2020, but a coverage percentage is not a statement of what state law requires. Check current state and local rules separately if you need a legal or policy determination.

How can you check or remove fluoride from your water?

Start by confirming your water supplier. A water bill can identify the utility, while a building manager can help if water service is included in your rent. For a private well, Greensboro’s public-system status and operational average do not describe your water.

To find out what is reaching your tap, ask a certified drinking-water laboratory for a fluoride test and follow its sampling instructions. Our guide to how to test water quality at home explains ways to approach testing. A household result is specific to the sample and conditions at the time it was collected.

If you want to reduce fluoride, look for a reverse-osmosis system or another treatment device specifically certified for fluoride reduction. Check the product’s certification and instructions, including its replacement schedule; a filter’s general certification or a claim to improve taste does not necessarily mean it reduces fluoride. Our guide to the best pitcher water filters can help you compare pitcher options, but verify fluoride reduction for the particular model.

A point-of-use device treats water at the outlet where it is installed, not necessarily every tap in the home. Testing before and after treatment can help you assess the water you actually drink.

Who should I ask about fluoride?

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Where does the Greensboro fluoride data come from?

The Greensboro status and level figures come from two different CDC My Water’s Fluoride reports. The status report identifies Greensboro as adjusted in 2025; the monthly report provides the state-reported operational values summarized for 2024. The 17 values appear across two rows, so they should not be described as 17 distinct months.

The separate CDC state and county dataset supplies the 2020 coverage percentages. Because the reports cover different years and measures, the county and state percentages should not be substituted for Greensboro’s utility status or its 2024 operational mean.

Frequently asked questions

Does “adjusted” mean Greensboro water contains only natural fluoride?

No. The CDC lists Greensboro as adjusted, meaning the utility adjusts the fluoride level rather than reporting only naturally occurring fluoride.

Does the Guilford County percentage include private-well users?

The 2020 percentage is based on the population served by public water systems, so it does not establish fluoride coverage for private-well users.

Will every pitcher filter remove fluoride?

No. Check whether the specific pitcher and filter are certified for fluoride reduction, rather than assuming that any pitcher filter removes it.