Is There Fluoride in Grand Rapids Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, the Grand Rapids utility adds fluoride; its reported 2025 operational level averaged about 0.67 mg/L.

Does Grand Rapids add fluoride to its water?

Grand Rapids is reported as a fluoridated water system. The fluoride product identified for the system is H2SiF6, so the reported status refers to added fluoride, not merely fluoride that occurs naturally in water.

The federal report identifies the system as GRAND RAPIDS, with water system ID MI0002790. If your address is near Grand Rapids but is served by a different utility or a private well, these figures may not describe your water. Compare other systems in our guide to fluoride in tap water by city.

How much fluoride is in Grand Rapids water?

The state-reported operational fluoride level for Grand Rapids was 0.67 mg/L in 2025, calculated as the mean of 12 monthly values. The lowest and highest reported monthly values were 0.64 mg/L and 0.69 mg/L, respectively.

MeasureLevelBasis
Grand Rapids mean0.67 mg/L2025 mean of 12 monthly operational values
Grand Rapids lowest monthly value0.64 mg/LLowest reported monthly value in 2025
Grand Rapids highest monthly value0.69 mg/LHighest reported monthly value in 2025
US Public Health Service recommended level0.7 mg/LRecommendation for community water fluoridation
EPA secondary standard2.0 mg/LNon-enforceable secondary standard
EPA maximum contaminant level4.0 mg/LEnforceable federal limit

The 2025 Grand Rapids mean was below the recommended level and both EPA standards. The 0.7 mg/L figure is a recommendation, not the EPA's enforceable limit; the two EPA figures have different regulatory roles.

The Grand Rapids mean summarizes monthly operational reporting rather than a measurement from every tap. A result from an individual home could differ from the system's reported mean.

How does Grand Rapids compare with Kent County and Michigan?

In 2020, 97.1% of Kent County's public water system population received fluoridated water. The corresponding figure for Michigan was 89.3% of the state's public water system population.

These percentages describe the share of people served by public water systems receiving fluoridated water. They are not fluoride concentrations, and the Kent County figure is not a measurement from the Grand Rapids utility. They also do not describe private-well users.

The county and state figures are from 2020, while the Grand Rapids operational measurements are from 2025. They are useful for context but should not be treated as a same-year comparison of local concentrations.

Does Michigan law require water fluoridation?

We found no verified state-policy information establishing whether Michigan requires community water fluoridation. The reported status of Grand Rapids shows that this system adds fluoride; it does not establish a requirement for every water system in the state.

Similarly, the 2020 Michigan percentage shows how much of the public water system population received fluoridated water at that time. It does not, by itself, explain the legal or policy decisions behind individual systems' practices.

How can you check your water or remove fluoride?

First, identify the utility that serves your address. A water bill or the utility's consumer confidence report can help you match your home to a system; Grand Rapids's system ID is MI0002790. If you use a private well, the Grand Rapids utility report does not tell you the fluoride level in your well.

For a measurement specific to your tap or well, contact a laboratory that tests drinking water for fluoride. Ask for its sampling instructions and a result in mg/L. Our guide to how to test water quality at home explains how to approach testing.

If you want to reduce fluoride, look for a treatment system independently certified for fluoride reduction, and check the claim for the exact model. Reverse osmosis and activated alumina systems are among the options that can reduce fluoride. Installation, maintenance and timely replacement of components matter to performance.

Do not assume that every pitcher or carbon filter removes fluoride. Check the product's specific certification and reduction claims before buying; our guide to the best pitcher water filters can help you compare options.

When should you ask a dentist or doctor?

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Where does the fluoride data come from?

The CDC fluoridation status report lists GRAND RAPIDS as fluoridated for 2025. The CDC monthly fluoride levels report contains the state-reported operational values used for the 2025 mean and monthly range.

The county and state population percentages come from the CDC state and county fluoridation dataset for 2020. Together, these sources distinguish the Grand Rapids system's reported fluoride level from the broader population coverage figures.

Frequently asked questions

Does 0.67 mg/L mean every Grand Rapids sample had that concentration?

No. It is the mean of 12 reported monthly operational values for 2025; the monthly values ranged from 0.64 to 0.69 mg/L.

Does boiling water remove fluoride?

No. Boiling does not reliably remove fluoride and can concentrate it as water evaporates.

What is H2SiF6 in the Grand Rapids report?

H2SiF6 is the fluoride product identified for the Grand Rapids water system. Its reported use indicates added fluoride rather than a natural-only fluoride measurement.