Is There Fluoride in Glendale Water?
Yes, fluoride is present: the mean of detected finished-water compliance samples was 0.47 mg/L in 2012–2019, but whether Glendale’s utility adds fluoride is not reported. For comparisons with other locations, see fluoride in tap water by city.
Is fluoride added to Glendale water or naturally present?
Historical testing found fluoride in finished water from Glendale, Arizona. The available information does not say whether Glendale adds fluoride, so the test results cannot establish the utility’s fluoridation status.
Fluoride can occur naturally in water or be added by a water system. Finding it in a sample does not, by itself, identify its source. Contact Glendale’s water utility if you want to know its current practice for your service address.
How much fluoride was measured in Glendale water?
The EPA’s historical compliance data include 84 finished-water samples for Glendale from 2012–2019. Fluoride was detected in 71 of those samples. The mean below is based on the detected samples, not all 84 samples.
| Measurement or standard | Fluoride level | Basis |
|---|---|---|
| Glendale detected-sample mean | 0.47 mg/L | Mean of detected finished-water compliance samples, 2012–2019 |
| Glendale maximum | 0.89 mg/L | Maximum reported in finished-water compliance samples, 2012–2019 |
| US Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Nonenforceable federal guideline |
| EPA maximum contaminant level | 4.0 mg/L | Enforceable federal drinking-water limit |
The historical Glendale mean was below the recommended fluoridation level, while the historical maximum was above it. Both measurements were below the two EPA standards shown. The recommendation is not the same kind of benchmark as an enforceable limit, and a comparison with one historical maximum does not by itself determine regulatory compliance.
The historical mean is not necessarily the level at your tap today. Water sources, sampling locations and operating conditions can change, so a current utility report or a new test is more useful for checking present conditions.
How does Glendale compare with its county and Arizona?
A county-level fluoridation percentage is not available in the data summarized here. That means the historical Glendale measurements cannot be used to calculate how many county residents receive fluoridated water.
In Arizona, 57.7% of the population served by public water systems received fluoridated water in 2020. That figure describes statewide coverage among people served by public systems; it is not the percentage of all Arizona residents, and it does not establish whether Glendale adds fluoride. It is also a historical figure rather than a current estimate.
What are Arizona’s law and Glendale’s policy on fluoride?
The information available here does not establish Arizona’s current law on community water fluoridation or Glendale’s policy on adding fluoride. The statewide coverage figure does not answer either question for an individual utility.
An EPA test result shows what was measured, not what a water system is required or chooses to do. For a current answer, ask Glendale’s utility or Arizona’s drinking-water authorities about the policy that applies to your water supply.
How can I check my water and remove fluoride if I want to?
Start with Glendale’s latest consumer confidence report, sometimes called an annual water quality report. Check the reporting year and sampling period, and ask the utility whether the report covers your address and whether fluoride is added to your supply.
For a result specific to your tap, ask a certified laboratory for a fluoride test and follow its sampling instructions. The guide to how to test water quality at home explains how to approach home water testing. If you use a private well rather than the public supply, a separate test is especially relevant because Glendale’s utility results do not describe your well.
Reverse osmosis systems, distillers and certain activated alumina filters can reduce fluoride when designed for that purpose. Check that the specific product is certified for fluoride reduction; a general filtration claim is not enough. The best pitcher water filters guide can help you compare options, but do not assume every pitcher removes fluoride.
Follow the manufacturer’s replacement and maintenance instructions. If you want to check how a filter performs at your home, a laboratory can test water before and after filtration.
Who should I ask about fluoride?
If you have questions about fluoride in your water, ask a dentist or doctor.
Where does the fluoride data come from?
The EPA Six-Year Review 4 compliance monitoring data contain the Glendale finished-water samples collected during 2012–2019. The detected-sample mean and maximum describe that historical dataset, not a current tap-water test.
The CDC community water fluoridation dataset supplies the 2020 Arizona coverage figure. It describes the population served by public water systems receiving fluoridated water, rather than the source of fluoride in Glendale’s samples.
Frequently asked questions
Does boiling water remove fluoride?
No. Boiling does not remove fluoride and can increase its concentration as water evaporates.
Does Arizona’s fluoridation percentage include people using private wells?
The 2020 figure uses the population served by public water systems as its basis. People using private wells outside those systems are not included in that population.