Is There Fluoride in Gilbert Water?
Yes, fluoride is present: Gilbert’s finished-water samples had a detected-sample mean of about 0.65 mg/L in 2012–2019, but whether the utility adds fluoride is not reported.
Does Gilbert add fluoride to its water?
The available measurement confirms that fluoride was detected in Gilbert’s water, but it does not establish whether the utility adds it. Fluoride can occur naturally in water, and its presence alone is not proof of fluoridation.
The records do not say whether Gilbert’s fluoride is entirely natural or whether its level is adjusted during treatment. For comparisons with other places, see fluoride in tap water by city.
How much fluoride was measured in Gilbert water?
The historical results and comparison values are:
| Measure | Fluoride level | Basis |
|---|---|---|
| Gilbert detected-sample mean | 0.65 mg/L | Mean of detected finished-water compliance samples, 2012–2019 |
| Gilbert sample maximum | 1.0 mg/L | Highest finished-water compliance sample result, 2012–2019 |
| U.S. Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Secondary drinking-water standard |
| EPA maximum contaminant level | 4.0 mg/L | Enforceable drinking-water limit |
Of 87 finished-water samples collected in 2012–2019, 85 had detectable fluoride. The reported mean is based on those 85 detections, not on all 87 samples.
The detected-sample mean was below the 0.7 mg/L recommendation, while the highest result was above it. Both historical figures were below the EPA’s 2.0 mg/L secondary standard and 4.0 mg/L limit. These comparisons describe the recorded samples; they do not establish Gilbert’s current fluoride level or compliance status.
What do county and Arizona figures show?
Gilbert is in Maricopa County. A county-wide percentage of people receiving fluoridated water is not available in the records cited here, so the Arizona figure should not be treated as a county estimate.
According to the CDC’s state and county fluoridation data, 57.7% of Arizona’s population served by public water systems received fluoridated water in 2020. That statewide figure covers multiple systems; it does not establish whether Gilbert’s utility adds fluoride.
What is Arizona’s law or policy on fluoridation?
The cited records do not establish Arizona’s state law or policy on community water fluoridation. They also do not establish whether a state policy requires or restricts fluoride additions by Gilbert’s utility.
For a current explanation of Arizona’s policy, ask the state drinking-water authority. For Gilbert’s treatment practices, ask the water utility directly; the historical fluoride measurements alone cannot answer that question.
How can you check your water or remove fluoride?
Start with your water bill to identify your supplier, then ask for its latest drinking-water quality report. You can also ask the supplier whether it adds fluoride, what recent fluoride results show and whether those results apply to your service area.
For a result from your own tap, ask a drinking-water laboratory for a fluoride test. Follow its sampling and shipping instructions, and check what the test costs and when the result will be available. Our guide explains how to test water quality at home.
If you want to reduce fluoride, look for a treatment product independently certified to reduce it. Reverse osmosis and distillation are possible approaches, but check the specific model’s performance claims and maintenance instructions rather than assuming every filter removes fluoride. If considering a pitcher, compare the best pitcher water filters and verify that the model you choose is certified for fluoride reduction.
A test before and after treatment can help you check the result at your tap. If you have questions about fluoride in your water, ask a dentist or doctor.
Where does the Gilbert data come from?
The Gilbert measurements come from the EPA’s Six-Year Review 4 compliance monitoring data. The record identifies the system as GILBERT, TOWN OF, and covers finished-water samples collected in 2012–2019.
The EPA record is useful for understanding what was measured during that period, including the detected-sample mean and maximum. It is not a live reading from your tap. The CDC figure is a separate statewide measure of the public-water-system population receiving fluoridated water in 2020, not a measurement of fluoride concentration in Gilbert.
Frequently asked questions
Does boiling water remove fluoride?
No. Boiling does not remove fluoride and can concentrate it as water evaporates.
Is the detected-sample mean an average of every Gilbert sample?
No. The 2012–2019 mean includes the 85 samples in which fluoride was detected, not all 87 samples.