Is There Fluoride in Georgia Water?
Yes, for most residents: 94.9% of people on community water systems in Georgia received fluoridated water in 2020. That statewide figure does not establish the fluoride level at a particular address. For comparisons elsewhere, see fluoride in tap water by city.
How much of Georgia’s water is fluoridated?
In 2020, 94.9% of people served by Georgia community water systems received fluoridated water, according to CDC’s community water fluoridation data. The percentage describes people served by those systems, not the percentage of all water sources or all Georgia residents.
It is also a statewide snapshot for 2020, not a current reading from an individual tap. It does not tell you which system serves your home or what fluoride concentration a recent sample from that system contained. Check your utility’s own information for those details.
A community water system serves a community of customers; a privately owned well is a different type of water source. The statewide percentage cannot establish whether a particular private well contains fluoride.
Does Georgia law require water fluoridation?
The statewide percentage does not establish whether Georgia law requires fluoridation or what policy applies to a particular system. Contact Georgia’s drinking-water regulator or your water utility if you need to know the current requirement for your location. Ask separately what the law says and what your utility actually does.
Fluoride can also occur naturally in water. Finding fluoride in a sample does not, by itself, show that a utility added it: community water fluoridation involves adjusting fluoride in a water supply. A utility can tell you whether it adjusts fluoride and identify its water source.
How can you check your city or utility’s water?
Start by identifying the water system that serves your address. Your water bill may name the utility; if it does not, ask the property manager, landlord or local water department. A city name alone may not identify the correct supplier, especially when neighboring areas have different systems.
Next, look for the utility’s latest drinking-water quality report, often called a Consumer Confidence Report. Find the fluoride entry and note the reporting year, the units and whether the value is an average, a range or another type of result. If the report is unclear or does not answer your question, contact the utility and ask for its latest fluoride results and whether it adds fluoride.
If you use a private well, the statewide utility percentage cannot answer what is in your water. A water test can measure fluoride in a sample; see how to test water quality at home for help planning a test. Confirm that the test specifically measures fluoride and follow the laboratory’s sampling instructions.
A result describes the sample and the time it was collected, so keep the date and units with it. If you are considering filtration, not every pitcher filter reduces fluoride. Check the product’s certification for fluoride reduction when comparing the best pitcher water filters.
What do fluoride levels and standards mean?
Fluoride concentrations are commonly reported in milligrams per liter (mg/L). The following numbers have different purposes; none is a measurement of a particular Georgia water system.
| Level | What it means |
|---|---|
| 0.7 mg/L | The US Public Health Service recommended level for community water fluoridation. It is a recommendation, not the EPA maximum contaminant level. |
| 2.0 mg/L | EPA’s secondary standard. Secondary standards are federal guidelines, not federally enforceable limits. |
| 4.0 mg/L | EPA’s maximum contaminant level for fluoride in public drinking water, an enforceable federal limit. |
Compare a local report or test result with the appropriate number, paying attention to the units and the period or sample the result represents. A utility report can help explain how its reported value was calculated; it should not be replaced by the statewide percentage.
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the Georgia data come from?
The Georgia percentage comes from the CDC Water Fluoridation Reporting System dataset linked above. Its 2020 figure describes the share of people on Georgia community water systems who received fluoridated water; it is not a statewide fluoride concentration.
The numerical comparison points are the US Public Health Service recommendation and EPA’s primary and secondary drinking-water standards. For an address-specific answer, use the statewide figure as context and seek a report from the system that serves the address or a test of the water source. The year and basis of a local result matter when comparing it with another report.
Frequently asked questions
Can a private well in Georgia contain fluoride?
Yes. Fluoride can occur naturally in water, but the statewide community-water-system percentage does not establish the level in a particular well. A fluoride-specific test can measure it.
Does every water filter pitcher remove fluoride?
No. If fluoride reduction matters to you, check whether the specific pitcher filter is certified for that purpose.
Does detecting fluoride prove a utility added it?
No. Fluoride can be naturally present in water. Ask the utility whether it adjusts fluoride in its supply.