Is There Fluoride in Garland Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, Garland’s utility adds fluoride, but its fluoride level is not reported in the available data. Garland is listed as fluoridated, rather than as a supply with only naturally occurring fluoride. For other locations, see fluoride in tap water by city.

Does Garland add fluoride to its water?

Yes. The CDC’s 2025 fluoridation status report lists GARLAND, public water system TX0570010, as fluoridated. The listed fluoride product is fluorosilicic acid, H2SiF6.

A fluoridated status means fluoride is added; it is not simply a statement that fluoride occurs naturally in the source water. The status report identifies the system but does not establish a fluoride concentration for a particular Garland tap.

How much fluoride is in Garland water?

The available data do not report a measured fluoride level for Garland. The year 2025 identifies the CDC status report, not a sampling year or a fluoride test result.

The following national values provide context, but none is a measurement of Garland water:

ValueWhat it represents
0.7 mg/LUS Public Health Service recommended level for community water fluoridation
2.0 mg/LEPA secondary standard, which is not federally enforceable
4.0 mg/LEPA maximum contaminant level, an enforceable limit

A milligram per liter, or mg/L, expresses the amount of fluoride in a volume of water. Because Garland’s measured concentration is not reported here, the available data cannot show how it compares with any of these values.

How does Garland compare with Dallas County and Texas?

In 2020, 98.9% of the Dallas County population served by public water systems received fluoridated water. The corresponding Texas figure was 71.0%, according to the CDC’s state and county fluoridation data.

These figures describe populations served, not the percentage of water systems that add fluoride. They also do not measure the fluoride concentration in Dallas County, Texas, or Garland water.

The county and state figures are broader context, not substitutes for Garland’s own system status. Their 2020 reporting year is also different from the 2025 Garland status report.

What does Texas law say about fluoridation?

The fluoridation data do not identify a Texas law or policy governing Garland’s decision to add fluoride. The CDC’s listing of Garland as fluoridated does not, by itself, establish whether state law requires fluoridation or which authority made the decision.

To check the policy behind Garland’s status, ask the water utility or the relevant state drinking-water authority for the applicable rules and local decision. Keep that question separate from a request for a measured fluoride level: a policy or status listing is not a water test.

How can you check your water or remove fluoride?

Start with your water bill or utility account to confirm which public water system serves your address. Then ask that utility for its latest water-quality report and the fluoride result, including the sampling date, concentration in mg/L and where the sample was collected. A system-level result may not be a measurement taken at your own tap.

For an address-specific result, use a laboratory that tests drinking water for fluoride. Ask for its sampling instructions and whether it can report the result in mg/L. Follow the lab’s directions for collecting and submitting the sample; our guide to how to test water quality at home explains the process.

If you want to reduce fluoride, reverse osmosis and distillation are treatment methods to consider. Check the specific device’s certification or performance data for fluoride reduction rather than assuming that every filter removes it. For a reverse-osmosis unit, look for a certification listing that specifically includes fluoride reduction.

A pitcher filter is not automatically designed to reduce fluoride. Compare the claims and certification for the exact model and replacement cartridge in our guide to the best pitcher water filters. Follow the manufacturer’s replacement instructions, and consider testing the treated water if you want to check the result at your tap.

Who should you ask about fluoride?

Ask a dentist or doctor if you have questions about fluoride in your drinking water.

Where does the Garland information come from?

The Garland status and system identifier come from the CDC’s 2025 My Water’s Fluoride report. The Dallas County and Texas population percentages come from the CDC’s 2020 state and county dataset.

Those sources answer different questions: the first identifies whether Garland is fluoridated, while the second gives broader population coverage. Neither supplies a measured Garland fluoride concentration in the data described above. For a concentration and sampling date, request a current result from the serving utility or a drinking-water laboratory.

Frequently asked questions

Does boiling Garland water remove fluoride?

No. Boiling does not reliably remove fluoride and can concentrate it as water evaporates.

Can you tell whether Garland water contains fluoride by tasting it?

Taste is not a reliable way to determine whether water contains fluoride or how much it contains. A fluoride-specific test can measure it.