Is There Fluoride in Frisco Water?
Yes, the Frisco utility adds fluoride, but a measured fluoride level is not reported in the available information. The CDC’s 2025 fluoridation status report lists Frisco as fluoridated. For other locations, see fluoride in tap water by city.
Does Frisco add fluoride to its water?
Frisco is listed as adding fluoride, rather than having only naturally occurring fluoride. The listed fluoride product is fluorosilicic acid, H₂SiF₆.
The CDC report identifies the Frisco public water system as TX0430005. Its 2025 status is a useful starting point, but it does not establish the fluoride concentration at an individual tap. Check the system name on your water bill if you are unsure whether the Frisco utility serves your address.
How much fluoride is in Frisco water?
A measured fluoride concentration for Frisco is not available in the information used here. There is therefore no measurement year or sampling basis—such as an average or a range—to compare with the following national figures.
| Figure | Fluoride level | What it represents |
|---|---|---|
| US Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | A federal secondary drinking-water standard |
| EPA maximum contaminant level | 4.0 mg/L | An enforceable federal drinking-water limit |
The recommended 0.7 mg/L is not the same as the EPA limit. Frisco’s listing as fluoridated does not establish that its water measures exactly 0.7 mg/L, or show how a measurement compares with either EPA standard.
Ask the utility for its latest water quality report and look for the fluoride entry. If a level is listed, check the report’s sampling year and whether the number is an average, a range or another measurement.
How do Collin County and Texas compare?
In 2020, 99.9% of the population served by public water systems in Collin County received fluoridated water, according to CDC state and county fluoridation data. The corresponding figure for Texas was 71.0% of the population served by public water systems in 2020.
These figures describe populations served, not measured fluoride concentrations. They also describe the county and state as a whole, not the status or level at every individual address. The county and state figures are from 2020; Frisco’s reported status is from 2025, so they should not be treated as measurements from the same year.
What is Texas’s fluoride policy?
The available information does not specify Texas’s state fluoridation policy. Frisco’s listed status alone does not establish whether state law requires fluoridation or how decisions are made for other water systems.
For a current explanation of the rules applicable to your address, ask the Frisco utility or the Texas drinking-water program. You can also ask the utility which public water system serves you and where to find its most recent fluoride results.
How can you check your water or remove fluoride?
Start with your water bill or utility account to identify the system serving your home. Request its latest water quality report, then find the fluoride result and the year in which it was measured. Ask the utility to explain the result if the report gives a range or uses a sampling description you do not recognize.
For a result specific to your tap, use a test designed to measure fluoride or contact a laboratory that tests drinking water. Ask how to collect the sample, what units the result will use and whether the laboratory can measure the concentrations you want to check. Our guide to how to test water quality at home explains the testing process.
If you want to reduce fluoride, look for a treatment device independently certified for fluoride reduction. Reverse osmosis systems are one option; check the certification for the exact device and replacement components, and follow the manufacturer’s maintenance schedule.
Not every pitcher or cartridge is certified to reduce fluoride. When comparing the best pitcher water filters, check the particular model’s certification and contaminant list rather than assuming it removes fluoride. Boiling water is not a reliable way to remove it.
Who should ask a dentist or doctor?
Anyone with questions about fluoride in Frisco drinking water can ask a dentist or doctor. If you are unsure what is appropriate for your household, consult one before changing your drinking-water routine.
Where does the information come from?
Frisco’s fluoridation status comes from the CDC’s 2025 status report, while the Collin County and Texas percentages come from CDC data for 2020. The national comparison figures are the US Public Health Service recommendation and EPA drinking-water standards.
Those sources answer different questions: status indicates whether a system is listed as fluoridated, county and state percentages describe populations served, and standards provide comparison levels. A current utility report or a fluoride test is needed to check a concentration.
Frequently asked questions
What does H₂SiF₆ mean in the Frisco listing?
H₂SiF₆ is the chemical formula for fluorosilicic acid, the listed fluoride product.
Is 0.7 mg/L the federal fluoride limit?
No. It is the US Public Health Service’s recommended level for community water fluoridation. The EPA maximum contaminant level is 4.0 mg/L.
Will every pitcher filter reduce fluoride?
No. Check whether the exact pitcher and replacement cartridge are independently certified for fluoride reduction.