Is There Fluoride in Fontana Water?

DetoxWater Editorial Team•Published November 5, 2026

No fluoride is added; Fontana water contains natural fluoride only, with a mean of about 0.27 mg/L in detected finished-water samples from 2012–2019.

Is there fluoride in Fontana water?

Yes. Fluoride is present naturally, but it is not added to the water covered by the Fontana report. The CDC’s 2025 fluoridation status report lists San Gabriel Valley Water Company – Fontana, system CA3610041, as Non-Adjusted and not fluoridated.

Natural fluoride and added fluoride are not the same status: a water system can contain fluoride without adjusting its concentration. For a broader comparison, see fluoride in tap water by city.

How much fluoride was measured in Fontana water?

The EPA’s historical compliance data include eight finished-water samples from 2012–2019. Fluoride was detected in seven of them. The following table separates the measured results from the national reference values.

Measure or referenceFluoride levelBasis
Fontana measured mean0.27 mg/LMean of detected finished-water compliance samples, 2012–2019
Fontana measured maximum0.45 mg/LHighest finished-water compliance sample, 2012–2019
US Public Health Service recommendation0.7 mg/LRecommended level for community water fluoridation
EPA secondary standard2.0 mg/LFederal secondary drinking-water standard
EPA maximum contaminant level4.0 mg/LEnforceable federal drinking-water limit

Both historical Fontana measurements are below all three reference values. The 0.7 mg/L recommendation is for community water fluoridation; it is not a requirement that every water system add fluoride. The EPA secondary standard is a non-enforceable federal guideline, while the maximum contaminant level is an enforceable federal limit.

The measured mean is not necessarily the concentration at a particular tap today. The samples describe finished water during 2012–2019, rather than a current measurement at every address.

How does Fontana compare with the county and state?

In 2020, 3.6% of the public water system population in San Bernardino County received fluoridated water. Across California, the corresponding figure was 57.5%, according to the CDC’s state and county fluoridation data.

Those percentages describe populations served by public water systems, not the fluoride concentration in a particular city’s water. The county and state figures also date from 2020; Fontana’s system status is from the CDC’s 2025 report. They should not be treated as measurements of an individual household’s water.

What is California’s fluoride law and policy?

The CDC’s Fontana status report identifies whether this particular system adjusts fluoride; it does not describe the California legal requirements that apply to individual water systems. The county and state population figures likewise do not establish what a state law requires.

For an up-to-date answer about the rules or policies relevant to your address, check current California law and ask your water supplier. The system’s reported Non-Adjusted status should not be used on its own to infer a statewide policy.

How can you check your water or remove fluoride?

Start by checking the supplier name on your water bill and asking for its latest water quality report. Confirm that the report covers your service address, then look for fluoride results and their sampling dates. A current supplier result may differ from the historical mean because it represents a different sampling period.

For a measurement at your own tap, ask a state-certified drinking-water laboratory whether it tests for fluoride. Follow its instructions for collecting the sample and request a result in mg/L. If you use a private well, a test of that well is more relevant than a public water system report. Our guide explains how to test water quality at home.

If you want to reduce fluoride, choose a treatment system specifically certified for fluoride reduction. Reverse osmosis systems and appropriately designed activated alumina systems can reduce it; check the certification and replacement instructions for the exact model. Not every pitcher or carbon filter is designed to reduce fluoride. See the best pitcher water filters and verify any model’s fluoride-reduction claim before buying.

Who should I ask about fluoride?

If you have questions about fluoride in your drinking water, ask a dentist or doctor for advice.

Where does the Fontana data come from?

The system’s fluoridation status comes from the CDC’s 2025 My Water’s Fluoride report. The 2020 county and state percentages come from the CDC’s community water fluoridation dataset; they provide context rather than a measurement for Fontana’s utility.

The measured mean, maximum and sample counts come from the EPA Six-Year Review 4 compliance monitoring data for system CA3610041. Those data cover 2012–2019, so ask the supplier or test your tap if you need a more recent result.

Frequently asked questions

Does boiling Fontana water remove fluoride?

No. Boiling does not reliably remove fluoride and can increase its concentration as water evaporates.

What does mg/L mean on a fluoride report?

It means milligrams of fluoride per liter of water, a measure of concentration.

Can you tell whether Fontana water contains fluoride by taste?

Taste is not a reliable way to determine fluoride concentration. A drinking-water test can provide a measured result.