Is There Fluoride in Florida Water?

DetoxWater Editorial Team•Published November 5, 2026

No, not anymore: Florida law ended the addition of fluoride to public water systems effective July 1, 2025, though naturally occurring fluoride may still be present.

The law concerns additives, not a guarantee that every tap has a fluoride level of zero. For comparisons outside Florida, see fluoride in tap water by city.

How much of Florida’s water was fluoridated?

In 2020, 78.5% of people served by Florida public water systems received fluoridated water, according to the CDC’s Water Fluoridation Reporting System data. The percentage describes people served, not the percentage of water systems or the amount of fluoride in a particular glass of water.

That figure predates the Florida law’s effective date. It cannot establish the current fluoride concentration at an address, and it does not describe water from private wells. A local water report or a test is needed to find a concentration.

What is Florida’s law on water additives?

Florida’s 2025 law prohibits additives in public water systems that do not meet the statutory definition of a “water quality additive.” The relevant provision took effect on July 1, 2025.

The enrolled bill text does not name fluoride in that provision. The Florida Senate’s bill analysis explains that additives used for health-related purposes are excluded.

The distinction between adding fluoride and finding fluoride in water matters. The law addresses additives in public water systems; it does not mean naturally occurring fluoride has been removed from a water source. A concentration reported on a water test is not, by itself, a description of why fluoride is present.

How can I find the fluoride level for my city or utility?

Start with the organization that actually supplies your address. A city name alone may not identify the water system serving your home, so check your water bill or ask your local government for the supplier’s name.

  1. Find your supplier’s water quality report. Look for its consumer confidence report and find the entry for fluoride. Note the concentration, its units and the year the sample was collected.
  2. Check what the result represents. A report may give a range or a result for a water system rather than a measurement from your own tap. If the sampling year is earlier than July 2025, remember that it predates the law’s effective date.
  3. Ask the supplier if the report is unclear. Request its most recent fluoride result, the sample date and whether the result represents your service area. An older result should not be assumed to describe the current level.
  4. Arrange a test if needed. If you use a private well or want a result from your tap, ask a laboratory about testing specifically for fluoride and follow its sampling instructions. See how to test water quality at home for more on arranging a test.

If you are considering filtration, not every pitcher reduces fluoride. Compare the best pitcher water filters and check the specific model and cartridge for independent certification for fluoride reduction.

What do the fluoride standards mean?

Fluoride concentrations in water are commonly reported in milligrams per liter (mg/L). These federal numbers have different purposes, so they should not be treated as interchangeable:

LevelWhat it means
0.7 mg/LThe U.S. Public Health Service recommended level for community water fluoridation. It is a recommendation, not the EPA’s maximum contaminant level.
2.0 mg/LThe EPA’s secondary standard for fluoride, a non-enforceable federal guideline.
4.0 mg/LThe EPA’s maximum contaminant level for fluoride in public drinking water.

Compare a local result with the relevant standard, but also check when and where the sample was collected. The 0.7 mg/L recommendation is not a measurement of Florida water, and none of these numbers establishes the level at your tap.

Questions about fluoride: Ask a dentist or doctor if you have questions.

Where does this information come from?

The CDC data gives the 2020 statewide percentage of the public-water population receiving fluoridated water. It is a historical population measure, not a current measurement of every Florida water source.

The Florida Senate bill page identifies the 2025 legislation and its effective date. The enrolled text provides the law’s wording, while the Senate analysis explains its treatment of additives used for health-related purposes. To determine what is in your water now, use a current result from your supplier or a test of your water.

Frequently asked questions

Can I tell whether water contains fluoride by tasting it?

No. Taste alone cannot establish whether fluoride is present or measure its concentration; check a water report or obtain a test.

Is mg/L the same as parts per million in a water report?

For dilute concentrations in water, 1 mg/L is approximately 1 part per million (ppm).