Is There Fluoride in Fargo Water?
Yes, the utility adds fluoride; its state-reported operational level averaged about 0.75 mg/L in 2025. For comparisons with other locations, see fluoride in tap water by city.
Is fluoride added to Fargo water?
Fargo’s public water system is reported as fluoridated, with an adjusted status. The CDC’s 2025 fluoridation status report identifies the system as FARGO CITY OF, with system ID ND0900336.
“Adjusted” means the utility adds fluoride to adjust its concentration; it is not a classification of water with naturally occurring fluoride only. The report does not establish how much of Fargo’s fluoride, if any, occurs naturally.
How much fluoride is in Fargo water?
The 2025 state-reported operational average was 0.75 mg/L, calculated as the mean of 12 reported monthly values. The CDC monthly fluoride report is the source for those values. The lowest and highest monthly values show that the reported level varied during the year.
| Fargo measurement | Level | Year and basis |
|---|---|---|
| Operational average | 0.75 mg/L | 2025; mean of 12 reported monthly values |
| Lowest reported monthly value | 0.66 mg/L | 2025; minimum of the monthly values |
| Highest reported monthly value | 0.94 mg/L | 2025; maximum of the monthly values |
Here is how the annual average compares with the federal reference levels:
| Federal reference | Level | Type |
|---|---|---|
| US Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Non-enforceable federal secondary standard |
| EPA maximum contaminant level | 4.0 mg/L | Enforceable federal limit |
Fargo’s 2025 operational average was 0.05 mg/L above the recommended level and below both EPA standards. These are different kinds of benchmarks: the recommendation is not the EPA maximum contaminant level. The operational average also is not a measurement of every household tap or, by itself, a determination of regulatory compliance.
How do Cass County and North Dakota compare?
In 2020, 99.0% of Cass County’s public water system population received fluoridated water. The corresponding figure for North Dakota was 96.5%. Both figures come from the CDC’s state and county fluoridation dataset.
Those percentages describe people served by public water systems, not necessarily all county or state residents. They are also broader context, not measurements of fluoride at a Fargo tap. A private well or another public system can have a different fluoride level.
The county and state figures are from 2020, while Fargo’s system status and operational measurements are from 2025. They should not be treated as a single, simultaneous snapshot.
Does North Dakota law require fluoride in water?
The records cited here do not establish North Dakota’s current fluoridation law or policy. Fargo’s adjusted status shows what was reported for its water system in 2025; it does not establish whether every system in the state must add fluoride.
For the current requirements, ask North Dakota’s drinking-water program or the Fargo utility. Separately, the EPA standards in the table above are federal reference levels and limits, not a statement of North Dakota’s fluoridation policy.
How can you check your water and remove fluoride?
First, identify your water source. If your bill or building manager identifies Fargo’s public system, ask the utility for its latest water-quality report and fluoride results. If you use a private well or another system, request results for that source instead of assuming Fargo’s average applies.
For a result at your own tap, ask a qualified drinking-water laboratory about fluoride testing and follow its sample-collection instructions. Our guide to how to test water quality at home explains how to approach home testing. A laboratory result reflects the sample and collection time, so it may differ from a system’s annual operational average.
If you want to reduce fluoride, look for a treatment product independently certified for fluoride reduction, not just a filter advertised for better taste. Reverse-osmosis systems and distillation units can reduce fluoride; check the specific product’s certification and maintenance instructions. Not every pitcher filter is designed to remove it, so check individual claims when comparing the best pitcher water filters.
Replace filters and maintain equipment as directed by the manufacturer. Boiling is not a fluoride-removal method and can concentrate fluoride as water evaporates.
If you have questions about fluoride for yourself or your children, ask a dentist or doctor.
Where does the Fargo data come from?
The Fargo status and level figures come from CDC’s My Water’s Fluoride reports for North Dakota. The status report identifies the public system and its adjusted classification; the monthly report supplies the 2025 operational values used for the average and range.
The county and state percentages come from a separate CDC dataset and are reported for 2020. For a newer local picture or a result specific to your address, consult the utility’s latest report or arrange a tap test.
Frequently asked questions
Can I tell whether Fargo water contains fluoride by taste?
Taste is not a reliable way to determine fluoride concentration. Use a water-quality report or a laboratory test instead.
Will a standard water softener remove fluoride?
A conventional water softener is not designed to reliably remove fluoride. Look for a treatment product specifically certified for fluoride reduction.
Does a private well in Cass County have Fargo’s fluoride level?
Not necessarily. Fargo’s reported operational average describes its public water system, not private wells; a well needs its own test.