Is There Fluoride in Evansville Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, Evansville Water Utility adds fluoride; its reported average was 0.69 mg/L in 2025.

For comparisons with other communities, see fluoride in tap water by city.

Does Evansville add fluoride to its water?

Yes. Evansville Water Utility is listed as fluoridated in the CDC’s 2025 Fluoridation Status Report. The utility’s annual water quality report also identifies fluoride addition and reports an average concentration.

Fluoride can occur naturally in water, but the Evansville answer is not based solely on natural occurrence: the utility adds fluoride. The reported concentration describes the water supplied by the utility, not necessarily water from a private well or a different provider in the area.

How much fluoride is in Evansville water?

Evansville Water Utility reported an average fluoride concentration of 0.69 mg/L in 2025 in its annual drinking water quality report. An average summarizes reported results; it is not a measurement of every glass of water or every home’s tap.

MeasureFluoride levelWhat it represents
Evansville Water Utility0.69 mg/LReported 2025 average
US Public Health Service recommendation0.7 mg/LRecommended level for community water fluoridation
EPA secondary standard2.0 mg/LA non-enforceable secondary standard
EPA maximum contaminant level4.0 mg/LAn enforceable limit for public water systems

The Evansville average is close to the US Public Health Service recommendation and below both EPA figures. The recommendation and the two EPA standards serve different purposes, so they should not be treated as interchangeable numbers.

A comparison with one reported average is also not a complete determination of a water system’s regulatory compliance. For individual sampling results and the utility’s reporting context, consult its annual report.

How does Evansville compare with Vanderburgh County and Indiana?

In 2020, 100% of the Vanderburgh County population served by public water systems received fluoridated water, according to CDC state and county data. The corresponding figure for Indiana was 92.4% of the population served by public water systems.

Those percentages describe public-water-system populations, not every county or state resident. They are also figures for 2020, rather than a current measurement at an Evansville tap. The county statistic provides context; it is not a separate fluoride reading for Evansville Water Utility.

What does Indiana law say about fluoridation?

The available data does not specify Indiana’s fluoridation law or statewide policy. Evansville Water Utility’s reported status establishes what that utility does, but it does not establish whether the state requires other systems to do the same.

For current legal or policy questions, ask Indiana’s drinking-water agency. For the practice at a particular address, contact the water provider serving that address rather than relying on a county percentage.

How can you check or remove fluoride from your water?

Start by identifying your water source. If Evansville Water Utility serves your address, ask the utility for its latest water quality report and any available fluoride sampling information. If you use a private well or another provider, the Evansville utility average does not tell you your water’s fluoride concentration.

For a measurement of your own tap or well, use a laboratory accredited to test drinking water for fluoride and follow its collection instructions. Our guide to how to test water quality at home explains how to approach water testing. A laboratory result reflects the sample collected, so ask the laboratory what the result can and cannot tell you about changes over time.

If you want to reduce fluoride, look for a treatment device independently certified for fluoride reduction. Reverse-osmosis systems are one option; check the certification and product documentation for the specific model. Follow the manufacturer’s maintenance and replacement instructions, and consider testing the treated water if you want to verify its fluoride level.

Do not assume that every pitcher or refrigerator filter removes fluoride. A filter’s claim for taste, odor or another contaminant does not establish fluoride reduction. When comparing the best pitcher water filters, check whether the particular model makes a certified fluoride-reduction claim.

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Where does the Evansville fluoride data come from?

The utility’s 2025 annual report is the source for Evansville’s reported average. The CDC’s 2025 status report identifies Evansville Water Utility as fluoridated, while the CDC’s 2020 state and county dataset supplies the population percentages above.

These sources answer different questions: the utility report gives a concentration, the status report identifies the utility’s fluoridation status, and the county and state dataset describes public-water-system population coverage. Check the latest utility report for newer measurements; the 2025 average should not be assumed to represent every later year.

Frequently asked questions

Can I tell whether water contains fluoride by its taste?

Taste alone cannot reliably tell you whether fluoride is present or how much is in the water. Check your provider’s report or have a sample tested.

Does a refrigerator filter necessarily remove fluoride?

No. Check the specific filter’s certification and product documentation for a fluoride-reduction claim.

Does the 2025 average show the exact fluoride level at my tap?

No. It is the utility’s reported average, not a measurement of every tap. A test of your own water can give you a result for the sample collected.