Is There Fluoride in Durham Water?
Yes, Durham’s utility adds fluoride; its 2024 state-reported operational level averaged about 0.7 mg/L.
Does Durham add fluoride to its water?
Durham’s public water system is listed as fluoridated, with a status of Adjusted, in the CDC’s 2025 Fluoridation Status Report. The report identifies the system as DURHAM, with the public water system ID NC0332010.
“Adjusted” means the fluoride level is adjusted by the water system; it is not merely a report that fluoride occurs naturally. Fluoride can occur naturally in water, but its natural presence alone does not mean a utility adds it.
To compare other systems, see fluoride in tap water by city.
How much fluoride is in Durham water?
The CDC’s 2024 monthly fluoride report gives an operational level for Durham averaging about 0.7 milligrams per liter (mg/L). That figure is the mean of 17 reported monthly values across two rows, not a measurement from every tap or a current guarantee.
| Measure or standard | Fluoride level | Basis |
|---|---|---|
| Durham operational average | About 0.7 mg/L | 2024 mean of reported monthly values |
| Durham reported range | 0.67–0.75 mg/L | Lowest and highest reported monthly values in 2024 |
| U.S. Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Secondary drinking water standard |
| EPA maximum contaminant level | 4.0 mg/L | Enforceable drinking water limit |
Durham’s reported average, rounded to 0.7 mg/L, matches the Public Health Service recommendation at that precision. Its reported monthly range in 2024 included values slightly below and above that recommendation and was below both EPA values shown above.
The operational average describes the reported system data for 2024. It does not establish the fluoride concentration at a particular address today; for that, check a recent report or test a sample.
What do Durham County and North Carolina data show?
In 2020, 98.7% of the population served by public water systems in Durham County received fluoridated water. Across North Carolina, the corresponding figure was 87.9%, according to the CDC’s state and county fluoridation data.
These percentages describe populations served by public water systems, not every resident or every water source. The county figure is context for Durham, not a separate measurement from Durham’s utility. Neither percentage establishes the fluoride level in an individual home, and both refer to 2020 rather than current coverage.
What is North Carolina’s fluoride law or policy?
The Durham system’s reported status does not by itself establish what North Carolina law requires or permits. We could not verify a current state fluoride law or policy from these records, so the system status should not be read as a statewide legal conclusion.
The CDC reports are useful for checking a system’s reported fluoridation status and levels. For a current policy question, ask the utility or the appropriate North Carolina drinking water agency rather than treating the 2025 status report as a statement of law.
How can you check or remove fluoride from your own water?
Start by identifying your water supplier. A water bill or your supplier can help you determine whether your address is served by the Durham system listed above; an address in Durham County does not, on its own, establish which system serves it.
Ask the supplier for its latest drinking water quality report and look for the fluoride result, the reporting year, and how the result was calculated. You can also ask whether a more recent operational level is available. If your water comes from a private well, the public-system figures above do not establish its fluoride level.
For an address-specific result, use a laboratory that tests drinking water for fluoride. Ask for its sampling instructions and follow them when collecting and submitting the sample. A home kit should specifically measure fluoride and have a useful range around the level you want to check; a general water-quality reading alone will not tell you the fluoride concentration. See how to test water quality at home for more on choosing a test.
If you want to reduce fluoride, look for a treatment device independently certified for fluoride reduction, and check the certification for the specific model and filter. Reverse osmosis and activated alumina are treatment options; do not assume every carbon filter or pitcher removes fluoride. Our guide to the best pitcher water filters can help you compare pitchers, but check each model’s fluoride-reduction claim before buying.
Follow the manufacturer’s installation and replacement instructions. If confirming the result matters to you, test the treated water as well as the untreated water; a filter’s certification is not a measurement from your own tap.
Who can answer personal questions?
Ask a dentist or doctor if you have questions about fluoride and your personal circumstances.
Where does the Durham fluoride data come from?
The status and level information comes from CDC My Water’s Fluoride reports: the status report identifies Durham as adjusted in 2025, while the monthly report supplies the 2024 operational values. The average combines 17 reported monthly values across two rows; those values should not be mistaken for 17 distinct months in one calendar year.
The county and state percentages come from a separate CDC dataset for 2020. Because the sources cover different years and measures, they answer different questions: whether the system reported fluoridation, what operational levels were reported, and what share of public-system populations received fluoridated water.
Frequently asked questions
Does boiling Durham water remove fluoride?
No. Boiling does not remove fluoride and can increase its concentration as water evaporates.
Can you tell whether Durham water contains fluoride by tasting it?
Taste is not a reliable way to determine the fluoride concentration. Check a water report or use a fluoride-specific test.