Is There Fluoride in Denver Water?
Yes, Denver’s utility adds fluoride; the mean of detected finished-water samples was about 0.62 mg/L in 2012–2019. For comparisons with other communities, see fluoride in tap water by city.
Does Denver add fluoride to its water?
Denver is listed as a fluoridated water system. The CDC’s 2025 Fluoridation Status Report identifies the system as DENVER, with the public water system ID CO0116001.
Fluoride can also occur naturally in water, but naturally occurring fluoride alone is not the same as adding it for fluoridation. Denver’s reported status is that the utility adds fluoride, not merely that fluoride was detected in its water.
The CDC status report and the EPA measurement serve different purposes: one reports the system’s fluoridation status, while the other records fluoride concentrations measured in finished water. The 2025 status does not itself give a current concentration at your tap.
How much fluoride is in Denver water?
In the EPA’s 2012–2019 compliance monitoring data, Denver’s mean was 0.62 mg/L across detected finished-water samples. The dataset included 256 finished-water samples, of which 255 had detected fluoride; the maximum measured level was 1.08 mg/L.
| Measure or benchmark | Fluoride level |
|---|---|
| Denver mean of detected finished-water samples, 2012–2019 | 0.62 mg/L |
| Denver maximum finished-water sample, 2012–2019 | 1.08 mg/L |
| US Public Health Service recommended level for community water fluoridation | 0.7 mg/L |
| EPA secondary standard | 2.0 mg/L |
| EPA maximum contaminant level | 4.0 mg/L |
The 2012–2019 mean was below the 0.7 mg/L recommended level. The maximum sample in that period was above 0.7 mg/L and below both EPA standards. The EPA secondary standard is a non-enforceable guideline; the maximum contaminant level is an enforceable limit.
The Denver mean is not a measurement of every home’s water or a current reading. Individual samples can differ from an average, and a historical maximum alone does not establish a system’s current regulatory compliance.
How does Denver compare with its county and Colorado?
The CDC’s 2020 state and county data reports the share of the public water system population receiving fluoridated water:
| Area | Share receiving fluoridated water | Year |
|---|---|---|
| Denver County | 100.0% | 2020 |
| Colorado | 75.2% | 2020 |
These figures describe populations served by public water systems, not necessarily every resident or every water source. The county percentage is context for Denver County as a whole; it is not a separate measurement of fluoride in Denver’s utility water. Both percentages are historical and should not be assumed to describe the present.
What is Colorado’s law or policy on fluoridation?
The sources cited here do not establish Colorado’s state law or policy on fluoridation. The CDC’s system listing reports Denver’s status, but it does not by itself show whether state law requires fluoridation or how decisions are assigned.
Likewise, the 2020 coverage percentages show how much of the public water system population received fluoridated water at that time. They do not, on their own, establish a statewide legal requirement.
How can you check or remove fluoride from your water?
Start by checking your water bill or asking your water provider which public water system serves your address. If it is Denver’s system, use the system ID CO0116001 when looking up its report. A different provider may have a different fluoride status or concentration.
For an address-specific result, ask a certified drinking-water laboratory for a fluoride test and follow its sampling instructions. Request the result in mg/L so you can compare it with the benchmarks above. Our guide explains more about how to test water quality at home.
If you want to reduce fluoride, look for a filter specifically certified to reduce fluoride, rather than assuming that any water filter will do so. Reverse-osmosis systems are one option; check the model’s certification and contaminant-reduction claims, then follow its installation and replacement instructions. For options in a common household format, see our guide to the best pitcher water filters.
A filter’s performance depends on the model and its maintenance. If you want to check its result, ask a laboratory about testing both unfiltered and filtered water.
If you have questions about fluoride in your water, ask a dentist or doctor.
Where does the Denver fluoride data come from?
The system status comes from the CDC’s 2025 report. The measured mean, maximum and sample counts come from EPA’s Six-Year Review 4 finished-water compliance data for 2012–2019.
The county and Colorado percentages come from the CDC’s 2020 Water Fluoridation Reporting System data. These sources cover different years and measures, so the historical concentration should not be treated as a current tap reading or as the basis for the 2025 status.
Frequently asked questions
Does boiling Denver water remove fluoride?
No. Boiling does not remove fluoride and can concentrate it as water evaporates.
Does the reported Denver average apply to every tap?
No. The 0.62 mg/L figure is the mean of detected finished-water samples from 2012–2019, not a measurement at every tap.
Is naturally occurring fluoride the same as fluoridation?
No. Fluoride can occur naturally in water; fluoridation involves adding fluoride to adjust its level.