Is There Fluoride in Delaware Water?
Yes, for most residents: 76.0% of people on community water systems in Delaware received fluoridated water in 2020. That statewide figure does not tell you the fluoride concentration at your tap or whether your own water system adds fluoride. For a wider comparison, see fluoride in tap water by city.
How much of Delaware’s water is fluoridated?
In 2020, 76.0% of people on Delaware community water systems received fluoridated water, according to CDC water fluoridation data. The percentage describes people served by those systems, not the percentage of water or the percentage of all Delaware residents.
The figure is a population estimate, not a fluoride measurement in milligrams per liter (mg/L). It also reflects 2020, so it does not establish the current status of every Delaware water supply. People using private wells are not represented as customers of a community water system in that figure.
Does Delaware law require water fluoridation?
The available statewide data does not establish whether Delaware has a law or policy requiring, permitting or restricting water fluoridation. It should not be used to decide what an individual utility is required to do.
For a current answer, ask the Delaware government or your water utility about the rules that apply to your supply. A utility can also explain whether it adds fluoride, receives treated water from another supplier or has naturally occurring fluoride in its source water.
Naturally occurring fluoride is not the same as a decision to add fluoride. A report showing fluoride in water, by itself, does not establish that the utility operates a fluoridation program.
How can you find out about your city or water utility?
Start with the name of the utility on your water bill, then look for its latest annual drinking water quality report. Search the report for “fluoride” and check the reporting year, the concentration and the unit. If a range and an average are listed, note which figure you are comparing with a standard.
Ask the utility if you cannot find fluoride in the report or need to know whether it adds fluoride. You can also ask when the samples were collected and whether the reported result represents the water delivered to your address. A statewide percentage cannot answer those local questions.
If you use a private well, a utility report may not describe your water. Ask a qualified laboratory about a test that specifically measures fluoride, and request the result in mg/L. Our guide to how to test water quality at home explains how to approach water testing.
If you are considering treatment, check a product’s specifications and independent certification for fluoride reduction rather than assuming every filter removes it. See our guide to the best pitcher water filters when comparing products.
What do the fluoride levels and standards mean?
A local test result can be compared with these distinct federal reference points. They are not measurements of Delaware water.
| Fluoride level | What it represents |
|---|---|
| 0.7 mg/L | The US Public Health Service’s recommended level for community water fluoridation. |
| 2.0 mg/L | The EPA’s secondary standard, a non-enforceable federal guideline. |
| 4.0 mg/L | The EPA’s maximum contaminant level, an enforceable federal limit for regulated public water systems. |
The 0.7 mg/L recommendation is not the same as the EPA’s 4.0 mg/L limit. Likewise, the secondary standard and the maximum contaminant level serve different purposes; a report should identify which one it is using for comparison.
These public-water references do not tell you the concentration in a private well. For either a well or a public supply, use an actual fluoride result from the relevant water source rather than substituting the Delaware statewide percentage.
Where does the Delaware data come from?
The statewide percentage comes from the CDC’s Water Fluoridation Reporting System, available through its state and county community water fluoridation dataset. Its 2020 figure describes the share of the relevant water-system population receiving fluoridated water; it does not provide a single measured fluoride concentration for Delaware.
For an individual address, the most useful additional sources are the water utility’s current report and its response to questions about its supply. For a private well, a fluoride-specific laboratory result gives information about that well rather than the statewide population figure.
Who should ask about fluoride?
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Frequently asked questions
Does finding fluoride in water mean a utility added it?
No. Fluoride can occur naturally, so a test result alone does not show whether a utility adds it.
Is 0.7 mg/L a federal minimum for fluoride?
No. It is the US Public Health Service’s recommended level for community water fluoridation, not the EPA’s maximum contaminant level.
Will every pitcher filter remove fluoride?
Do not assume so. Check the specific product’s specifications and independent certification for fluoride reduction.