Is There Fluoride in Dayton Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, the Dayton Public Water System adds fluoride; its state-reported operational level averaged about 0.92 mg/L in 2025.

Does Dayton add fluoride to its water?

The CDC lists the Dayton Public Water System as fluoridated, with an adjusted status in 2025. That means the utility adds fluoride; the designation does not mean the water relies only on naturally occurring fluoride.

Adjusted status also does not establish how much fluoride, if any, occurs naturally in the source water. The reported level reflects fluoride measured in the system, not a separate measurement of the amount added.

For other utilities, see fluoride in tap water by city. A city’s name alone does not always identify the water system serving a particular address.

How much fluoride is in Dayton water?

Dayton’s state-reported operational fluoride level averaged 0.92 mg/L in 2025, based on the mean of 24 monthly values reported across two rows. Those values ranged from 0.89 to 0.99 mg/L in 2025.

Measure or referenceFluoride levelWhat it represents
Dayton reported level0.92 mg/L2025 mean of 24 state-reported monthly operational values across two rows
Dayton reported range0.89–0.99 mg/LLowest and highest of those 24 monthly values in 2025
US Public Health Service recommendation0.7 mg/LRecommended level for community water fluoridation
EPA secondary standard2.0 mg/LNon-enforceable secondary standard
EPA maximum contaminant level4.0 mg/LEnforceable drinking-water limit

Dayton’s 2025 reported mean was above the 0.7 mg/L recommendation and below both the 2.0 mg/L secondary standard and the 4.0 mg/L limit. The recommendation and the EPA standards have different roles: the 0.7 mg/L figure is not itself an enforceable maximum contaminant level.

The annual mean is useful for comparison, but it is not a test result for every tap or a complete compliance assessment. Ask the utility for its current water-quality report and any more recent results.

How does Dayton compare with the county and Ohio?

Dayton’s reported status applies to the Dayton Public Water System, not automatically to every water system in its surrounding counties. A countywide fluoridation percentage cannot be determined from the Dayton system figures alone.

Statewide, 92.7% of Ohio’s public water system population received fluoridated water in 2020, according to the CDC. That statewide percentage is not a measurement of fluoride concentration and does not identify the water supplier at a particular Dayton-area address.

What does Ohio law say about fluoridation?

The Dayton system’s adjusted status shows what was reported for that utility; it does not establish whether a state law requires the practice. Similarly, the statewide percentage does not explain the policy or legal requirements for an individual system.

For current Ohio requirements or the policy governing your supplier, ask the Ohio Department of Health or the utility. Do not assume that another system follows the same practice as Dayton simply because it operates in Ohio.

How can you check your water and remove fluoride?

Start by identifying your water supplier on your bill or by asking the utility that serves your address. The CDC identifies the Dayton Public Water System as OH5703512. If your supplier is different, request its own water-quality report or fluoride results rather than applying Dayton’s numbers to your home.

For a result at your tap, use a laboratory that offers a fluoride test and follow its sampling instructions. A home kit must specifically measure fluoride; a general water-quality reading does not establish the fluoride concentration. Our guide explains how to test water quality at home.

If you want to reduce fluoride, look for a treatment device specifically certified for fluoride reduction. Some reverse-osmosis systems and some filters with fluoride-reduction media can reduce it, but certification depends on the particular product and model. Distillation is another treatment option.

Check the manufacturer’s performance information and an independent certification listing for a fluoride-reduction claim, then follow the maintenance and replacement instructions. Do not assume that every pitcher or carbon filter removes fluoride. Our guide to the best pitcher water filters can help you compare models, but verify each model’s fluoride claim separately.

Who should you ask about fluoride?

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Where do these figures come from?

The CDC’s fluoridation status report lists Dayton Public Water System as adjusted in 2025. Its monthly average fluoride report contains the 2025 operational values used for the mean and range above.

The CDC state and county fluoridation dataset is the source for Ohio’s 2020 public water system population percentage. The sources describe different things: system status, measured operational levels and statewide population coverage.

Frequently asked questions

Does adjusted status mean Dayton water contains no natural fluoride?

No. Adjusted status means fluoride is added; it does not say how much fluoride occurs naturally in the source water.

Do the 24 reported monthly values cover 24 consecutive months?

Not necessarily. The 2025 report contains 24 monthly values across two rows; that does not establish that they represent 24 consecutive months.