Is There Fluoride in Connecticut Water?
Yes, for most residents: in 2020, 90.4% of people on Connecticut community water systems received fluoridated water. The statewide figure does not tell you the fluoride level at a particular address; compare local information in our guide to fluoride in tap water by city.
How much of Connecticut’s water is fluoridated?
In 2020, 90.4% of the population served by Connecticut community water systems received fluoridated water, according to the CDC’s reporting data. That is a measure of people served, not the percentage of water systems, towns or individual taps.
The figure is also a snapshot from 2020, not a current measurement for every community. It does not tell you whether a particular system adjusted its fluoride level or what concentration was measured in that system’s water.
Fluoride can occur naturally in a water source. Its natural presence is not the same thing as fluoridation, which involves adjusting the fluoride concentration in a water supply.
What is Connecticut’s law or policy on fluoridation?
The CDC coverage figure alone does not establish what Connecticut law requires or whether a particular utility adds fluoride. It also cannot tell you what policy applied to an individual system in 2020 or what applies to it now.
For the requirements relevant to your address, ask your water utility or the Connecticut Department of Public Health. You can also ask your utility whether it adjusts fluoride, relies on naturally occurring fluoride, or can provide a recent fluoride test result for its water.
How can you find out about your city or utility?
Start by identifying the water system that serves your address. Your water bill may name it; if water is included in your rent or building fees, ask your landlord or building manager for the supplier’s name. A city name alone may not identify the system serving a particular property.
Look for that system’s annual drinking water quality report, often called a Consumer Confidence Report. Check the fluoride entry, the units and the year the sample was collected. A report’s publication year and the year of a particular sample are not necessarily the same.
If the report is unclear, ask the utility for its most recent fluoride result, where the sample was taken and whether fluoride is added. A system-wide report may describe water at a sampling location rather than a separate measurement from your own tap.
If you use a private well, the community-system percentage does not tell you your well’s fluoride level. Ask a qualified laboratory about testing your water for fluoride and how to collect the sample; our guide to testing water quality at home explains how to approach water testing.
A home filter can make the water at your tap different from the water described in a utility report. If you are considering one, check the specific model’s documentation for fluoride reduction rather than assuming every pitcher removes it. See our guide to the best pitcher water filters.
What do the fluoride levels and standards mean?
Fluoride results are commonly reported in milligrams per liter (mg/L). The following are reference values, not measurements of Connecticut’s water:
| Reference | Fluoride level | What it represents |
|---|---|---|
| US Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | A federal secondary standard, not the enforceable federal limit |
| EPA maximum contaminant level | 4.0 mg/L | The enforceable federal limit for public water systems |
These values have different purposes, so they should not be treated as interchangeable. To interpret a local result, compare its units and sampling date with the relevant reference; the statewide coverage percentage is not itself a fluoride concentration.
When should you ask a dentist or doctor?
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the Connecticut data come from?
The coverage figure comes from the CDC’s community water fluoridation state and county dataset, which reports information from the Water Fluoridation Reporting System. The Connecticut figure here describes the population served by community water systems in 2020.
The dataset’s coverage measure should not be read as a current test result for an individual utility or household. A utility report or a laboratory result is the more useful source for a measured concentration at a specific system or well.
The comparison values come from the US Public Health Service recommendation and EPA’s primary and secondary drinking water standards. They are national reference values, not Connecticut-specific measurements.
Frequently asked questions
Can you tell whether water contains fluoride by looking at it?
No. Water’s appearance does not reliably reveal its fluoride content. Check a water quality report or arrange a fluoride test.
Does boiling water remove fluoride?
No. Boiling does not reliably remove dissolved fluoride and can concentrate it as water evaporates.