Is There Fluoride in Colorado Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, for most residents: 75.2% of people on Colorado community water systems received fluoridated water in 2020. That statewide figure does not establish the level in any particular city or home. For other locations, see fluoride in tap water by city.

How much of Colorado’s water is fluoridated?

According to the CDC’s community water fluoridation data, 75.2% of people on Colorado community water systems received fluoridated water in 2020. The figure describes people served by those systems, not the percentage of water systems or the percentage of the state’s land area.

It also does not describe every Colorado resident: its basis is the population served by community water systems. The figure is for 2020, so it should not be treated as a current local finding.

Fluoride can occur naturally in water, and a water system can also add fluoride. The presence of natural fluoride alone does not establish that a system practices fluoridation. The statewide coverage figure does not show how much fluoride at a particular tap is natural or added.

What is Colorado’s law or policy on fluoridation?

The statewide coverage figure does not establish Colorado’s current law or policy on fluoridation. It does not, by itself, say whether state law requires or prohibits a particular practice, or identify who makes the decision for a local system.

For a current answer, check Colorado’s statutes or contact the state drinking water program. Your water utility can also explain its own practices. Ask specifically whether it adds fluoride, rather than assuming that a reported fluoride level means fluoride was added.

How can you find out about your city or utility?

Start with the water system that serves your address. A city name alone may not identify the utility serving a particular home, so check your water bill or ask your property manager if you are unsure.

Look for the utility’s most recent annual drinking water quality report, sometimes called a consumer confidence report. Find the entry for fluoride and note the sampling year, the reported level and the units. If the report lists a range or an average, read the accompanying description before treating that number as the level at your tap.

You can also contact the utility and ask whether it adds fluoride, whether fluoride occurs naturally in its source water, and what its latest testing found. If the utility uses more than one source, ask which information applies to your service area. A statewide coverage percentage cannot answer those address-specific questions.

If you use a private well, the community-water coverage figure does not tell you the well’s fluoride level. A laboratory test of your water can provide a result for the sample you submit; see how to test water quality at home. Ask the laboratory for a fluoride test and follow its sampling instructions.

If you are considering a filter, check the specific model’s independently certified fluoride-reduction claim; not every pitcher is designed to reduce fluoride. Our guide to the best pitcher water filters can help you compare options.

What do the fluoride levels mean?

Fluoride in drinking water is commonly reported in milligrams per liter, written as mg/L. The following numbers have different purposes; none is a measured statewide Colorado level.

LevelWhat it represents
0.7 mg/LThe US Public Health Service’s recommended level for community water fluoridation.
2.0 mg/LThe EPA’s secondary drinking water standard for fluoride, a non-enforceable federal guideline.
4.0 mg/LThe EPA’s maximum contaminant level for fluoride in public drinking water systems.

The 0.7 mg/L recommendation is not a report of what every fluoridated system contains. Likewise, the EPA standards are benchmarks, not measurements of your utility’s water. Compare a local report or laboratory result with the appropriate number, keeping the sampling date and units in view.

Who should ask about fluoride?

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Where does the Colorado data come from?

The statewide percentage comes from the CDC’s Water Fluoridation Reporting System dataset linked above. Its Colorado figure covers the population on community water systems in 2020; it is a coverage statistic, not a statewide fluoride concentration.

The dataset does not establish a measured fluoride level for a particular Colorado city or home. For that information, use a utility report or a test of your water. The Public Health Service recommendation and EPA standards are separate reference values, so they should not be mistaken for results from the CDC dataset.

Frequently asked questions

Does boiling water remove fluoride?

No. Boiling does not remove fluoride and can concentrate it as water evaporates.

Can you tell whether water contains fluoride by looking at it?

No. Clear water can contain dissolved fluoride. Check a water quality report or arrange a laboratory test.