Is There Fluoride in Clearwater Water?

DetoxWater Editorial Team•Published November 5, 2026

No, not anymore: Clearwater stopped adding fluoride under a Florida law effective July 1, 2025, although naturally occurring fluoride can still be present.

Does Clearwater add fluoride to its water?

Clearwater no longer adds fluoride to its public water supply. That is different from saying the water contains no fluoride: fluoride can occur naturally in water without being added through fluoridation.

The CDC’s 2025 My Water’s Fluoride report lists the Clearwater Water System as fluoridated and identifies fluorosilicic acid as its fluoride product. That status predates the change in Florida law. For comparisons with other locations, see fluoride in tap water by city.

How much fluoride has been measured in Clearwater water?

In EPA compliance monitoring data from 2012–2019, Clearwater’s unweighted mean among detected finished-water samples was 0.16 mg/L. The data include 28 samples from water-system entry points, of which 16 detected fluoride.

The highest reported result in those 2012–2019 samples was 0.31 mg/L. Both figures are historical measurements, not current tap-water results; the samples may include water from unfluoridated sources or reflect practices that have since changed.

ComparisonFluoride levelWhat it represents
Clearwater detected-sample mean, 2012–20190.16 mg/LUnweighted mean of detected finished-water compliance samples
Clearwater sample maximum, 2012–20190.31 mg/LHighest result among the reported finished-water compliance samples
US Public Health Service recommendation0.7 mg/LRecommended level for community water fluoridation, not a minimum requirement
EPA secondary standard2.0 mg/LNon-enforceable secondary drinking-water standard
EPA maximum contaminant level4.0 mg/LEnforceable limit for public water systems

The historical mean and maximum were below all three comparison values. They do not establish what fluoride concentration is at a particular Clearwater tap today.

What do the county and state figures show?

The CDC’s 2020 state and county data reported that 100% of Pinellas County’s public-water-system population received fluoridated water. The corresponding Florida figure was 78.5% in 2020.

These figures describe populations served by public water systems, not fluoride concentrations. They also predate the 2025 Florida law, so they should not be treated as current county or statewide fluoridation rates.

What does Florida law say about water additives?

Florida’s 2025 Senate bill page identifies the law as Chapter 2025-22, with the relevant change effective July 1, 2025. Clearwater’s addition of fluoride ended under that law.

The enrolled bill text prohibits public water systems from using additives that do not meet the statutory definition of a water quality additive. The provision does not name fluoride. A Florida Senate bill analysis explains that additives included primarily for health-related purposes are excluded.

How can you check or remove fluoride from your water?

Start by confirming which utility serves your address; a mailing address alone does not always identify the water system. Ask the utility for its latest water-quality report and a current fluoride result, including when and where the sample was collected. A system-wide result may not match the concentration at your tap.

For a tap-specific result, use a laboratory that tests drinking water for fluoride. Follow its sampling instructions and ask for the result in mg/L. A home test designed specifically for fluoride is another option; check its measurement range and follow the directions. Our guide explains how to test water quality at home.

If you want to reduce fluoride, consider a reverse-osmosis system or another filter specifically certified for fluoride reduction. Check the certification and contaminant-reduction claims for the exact model: not every pitcher or filter removes fluoride. Compare options in our guide to the best pitcher water filters, and replace filters as directed by the manufacturer.

When should you ask a dentist or doctor?

If you have questions about fluoride in your drinking water, ask a dentist or doctor. They can help you interpret a test result for your circumstances.

Where does the information come from?

The historical concentration and sample counts come from EPA’s Six-Year Review compliance data for the Clearwater Water System. Those finished-water samples were collected at system entry points, so they are not a substitute for a current test at your own tap.

The older fluoridation status and 2020 population figures come from CDC records. The Florida Senate’s bill page, enrolled text and analysis document the 2025 policy change and its effective date.

Frequently asked questions

Does boiling Clearwater water remove fluoride?

No. Boiling does not remove fluoride and can increase its concentration as water evaporates.

What does mg/L mean on a fluoride test?

It means milligrams of fluoride per liter of water. In drinking water, 1 mg/L is approximately 1 part per million.