Is There Fluoride in Clarksville Water?
Yes, Clarksville Gas & Water adds fluoride; its state-reported operational level averaged about 0.4 mg/L in 2025.
Does Clarksville water contain added fluoride?
Clarksville Gas & Water is listed as fluoridated, with an “Adjusted” status. That means the reported status is added fluoride, not merely fluoride occurring naturally in the water.
The listing identifies the public water system as Clarksville Gas & Water, system number TN0000116. Check your water bill or contact your supplier if you are unsure whether that system serves your address. For comparisons with other utilities, see fluoride in tap water by city.
How much fluoride is in Clarksville water?
The state-reported operational fluoride level for Clarksville Gas & Water was approximately 0.4 mg/L in 2025, calculated as the mean of 12 monthly values. Those monthly values ranged from 0.11 mg/L to 0.54 mg/L in 2025.
Two of the 12 reported monthly values were below 0.2 mg/L in 2025. These low values pull down the annual mean, so that mean does not necessarily represent the level in months when fluoride was being fed.
| Comparison | Fluoride level | What it represents |
|---|---|---|
| Clarksville Gas & Water, 2025 | About 0.4 mg/L | Mean of 12 state-reported monthly operational values |
| US Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | A non-enforceable secondary standard |
| EPA maximum contaminant level | 4.0 mg/L | An enforceable drinking-water limit |
Clarksville’s reported 2025 mean was below all three comparison levels. The annual operational mean is not a measurement of every tap or a determination of regulatory compliance; ask the utility for its current results and compliance information.
How does Montgomery County compare with Tennessee?
In 2020, 93.7% of Montgomery County’s population served by public water systems received fluoridated water. The corresponding figure for Tennessee was 88.8%.
These figures describe public-water-system populations, not all residents or every water source. They are also from 2020, while Clarksville Gas & Water’s status and operational measurements above are from 2025. The county and state percentages do not show the fluoride concentration at an individual address.
What is Tennessee’s fluoride law or policy?
The reporting cited here does not establish whether Tennessee law requires, permits or restricts fluoridation, or whether a current state policy applies. Clarksville Gas & Water’s adjusted status describes the reported system, not a statewide legal requirement.
For current rules, ask Tennessee’s drinking-water program or Clarksville Gas & Water. When asking, distinguish a question about the utility’s current practice from a question about what state or local law requires.
How can you check or remove fluoride from your water?
Start by identifying your water source. If Clarksville Gas & Water serves you, request its latest water-quality report and ask for the most recent fluoride results, including the dates and whether the figures are individual measurements or averages. If you use a private well or another supplier, the Clarksville utility results do not establish your water’s fluoride level.
For an address-specific result, ask a laboratory whether it tests drinking water for fluoride and follow its sampling instructions. Our guide to how to test water quality at home explains how to approach testing and results.
If you want to reduce fluoride, reverse osmosis and certain activated alumina systems can do so. Choose a device certified specifically for fluoride reduction, check its capacity and maintenance instructions, and replace components as directed. Do not assume that every carbon filter or pitcher removes fluoride; check the specific model’s certification and reduction claim when comparing the best pitcher water filters.
If you have questions about fluoride in your water, ask a dentist or doctor.
Where does the Clarksville fluoride data come from?
The CDC’s 2025 fluoridation status report lists Clarksville Gas & Water as fluoridated and adjusted. Its 2025 monthly fluoride levels report is the source for the monthly values used to calculate the approximate annual mean.
The CDC state and county dataset supplies the 2020 Montgomery County and Tennessee percentages. For a newer local picture, request current results from your own supplier rather than treating those historical percentages as a tap-water test.
Frequently asked questions
Does boiling Clarksville water remove fluoride?
No. Boiling does not remove fluoride and can concentrate it as water evaporates.
Does a standard water softener remove fluoride?
A standard water softener is not designed to reliably remove fluoride. Look for a treatment device certified specifically for fluoride reduction.