Is There Fluoride in Chicago Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, Chicago’s utility adds fluoride; finished-water samples measured a mean of 0.75 mg/L from 2012–2019. For comparisons with other cities, see fluoride in tap water by city.

Does Chicago add fluoride to its water?

Chicago’s water is fluoridated: fluoride is added by the utility, rather than the reported status referring only to fluoride that occurs naturally. The CDC’s 2025 Fluoridation Status Report lists CHICAGO, public water system IL0316000, as fluoridated.

The status report and the historical measurements answer different questions. The status identifies Chicago as a fluoridated system; the measurements show the fluoride concentrations found in a set of finished-water samples collected over an earlier period. Neither is a test result for an individual home today.

How much fluoride is in Chicago water?

The EPA’s Six-Year Review 4 monitoring data include 16 finished-water compliance samples for Chicago from 2012–2019. Fluoride was detected in all 16 samples. The mean of the detected samples was 0.75 mg/L, and the highest sample was 0.98 mg/L.

Measurement or benchmarkFluoride concentration
Chicago mean of detected finished-water samples, 2012–20190.75 mg/L
Chicago maximum finished-water sample, 2012–20190.98 mg/L
US Public Health Service recommended level for community water fluoridation0.7 mg/L
EPA secondary standard2.0 mg/L
EPA maximum contaminant level4.0 mg/L

The historical mean was slightly above the recommended 0.7 mg/L level and below both EPA standards. The historical maximum was also below the two EPA standards, though it was above the recommended level.

These benchmarks have different roles. The US Public Health Service figure is a recommended level for community water fluoridation, not the EPA maximum contaminant level. EPA’s 2.0 mg/L figure is a secondary standard, while 4.0 mg/L is the maximum contaminant level. The historical sample maximum is not necessarily the highest concentration present throughout Chicago’s system at every time during that period.

How does Chicago compare with Cook County and Illinois?

The CDC’s 2020 state and county data report the share of people served by public water systems who received fluoridated water:

AreaShare receiving fluoridated waterYear
Cook County99.2%2020
Illinois98.4%2020

Those figures describe coverage among people served by public water systems, not fluoride concentrations. They also do not establish that every water system in the county or state was fluoridated. Chicago’s utility status is a separate system-level record.

What does Illinois law say about fluoridation?

The available records do not establish the current details of Illinois law or state policy on water fluoridation. The CDC coverage figures and Chicago’s reported status describe water-system coverage and status; they do not, by themselves, identify the legal requirements behind either.

For a current statement of applicable rules, check Illinois statutes or ask the state drinking-water authority. Do not use the county percentage as a substitute for checking the policy that applies to a particular system.

How can you check your water or remove fluoride?

First, identify your water provider and look for its latest consumer confidence report. If Chicago is listed as your system, check the report’s sampling dates and fluoride results rather than treating the 2012–2019 mean as a current measurement. A neighboring community may have a different provider, so use the report for the system that serves your address.

For a measurement at home, ask a drinking-water laboratory whether it tests for fluoride and follow its instructions for collecting and submitting a sample. Request the result in mg/L so you can compare it with the figures above. Our guide to how to test water quality at home explains how to approach testing.

If you want to reduce fluoride, look for a filter specifically certified to reduce fluoride and check its replacement instructions. Reverse osmosis systems and some other filters can be certified for this purpose, but not every pitcher or carbon filter removes fluoride. When comparing the best pitcher water filters, verify the fluoride-reduction claim for the exact model.

If you have questions about fluoride in your water, ask a dentist or doctor.

Where does the data come from?

The Chicago status comes from the CDC’s 2025 system report. The concentration figures come from EPA’s 2012–2019 compliance-monitoring dataset, using Chicago’s finished-water fluoride samples; the mean summarizes detected samples, and the maximum is the highest sample in that set.

The Cook County and Illinois coverage percentages come from the CDC’s 2020 reporting data. Because the sources cover different years and use different measures, the coverage percentages should not be read as measurements of fluoride concentration or as a current test of water at your tap.

Frequently asked questions

Does boiling Chicago water remove fluoride?

No. Boiling does not remove fluoride; evaporation can concentrate it in the water that remains.

What does mg/L mean on a fluoride report?

It means milligrams of fluoride per liter of water, a measure of concentration.