Is There Fluoride in Chesapeake Water?
Yes, the utility adds fluoride to Chesapeake water; its reported average was about 0.78 mg/L in 2023.
Does Chesapeake add fluoride to its water?
The CDC’s 2025 fluoridation status report lists the City of Chesapeake’s Northwest River system, identified as VA3550051, as fluoridated. The fluoride product reported for the system is fluorosilicic acid, or H2SiF6.
That means the reported status is about fluoride added by the utility, not just fluoride that occurs naturally in a water source. For a broader comparison, see fluoride in tap water by city.
How much fluoride is in Chesapeake water?
The CDC’s monthly fluoride report gives Chesapeake’s state-reported operational fluoride levels for 2023. The mean of the 12 monthly values was 0.78 mg/L; the monthly values ranged from 0.70 mg/L to 0.83 mg/L in 2023.
| Measurement or reference | Fluoride level | What it represents |
|---|---|---|
| Chesapeake reported mean | 0.78 mg/L | Mean of 12 monthly operational values in 2023 |
| Chesapeake reported range | 0.70–0.83 mg/L | Lowest to highest monthly operational value in 2023 |
| U.S. Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | A non-enforceable secondary drinking-water standard |
| EPA maximum contaminant level | 4.0 mg/L | The enforceable drinking-water limit |
The 2023 Chesapeake mean was slightly above the 0.7 mg/L recommendation and below both EPA standards. The recommendation and the two EPA standards serve different purposes; the 0.7 mg/L figure is not the federal maximum contaminant level.
An annual mean also does not tell you the exact concentration at a particular tap today. The 2023 monthly range shows variation within the reported year, while a newer report or a test is needed for more recent information.
How does Chesapeake compare with Virginia?
The CDC state and county data report that 97.2% of the public-water-system population in the entry labeled “Chesapeake County” received fluoridated water in 2020. The corresponding figure for Virginia was 95.5% in 2020.
Chesapeake is an independent city in Virginia; “Chesapeake County” is the label used for the local entry in that dataset. The percentages describe population coverage, not the concentration of fluoride in a glass of water. They also are not a substitute for checking which system serves your address.
What is Virginia’s fluoridation law and policy?
The available information does not establish whether Virginia law requires or prohibits water fluoridation. Chesapeake’s reported practice shows what the Northwest River system was listed as doing in the 2025 status report; it does not, on its own, establish a statewide legal requirement.
For a current policy question, ask the utility or the relevant Virginia drinking-water authority. Keep the legal question separate from a system’s reported status: a status report identifies a practice, not necessarily the law behind it.
How can you check your water or remove fluoride?
First, confirm who supplies your address. Ask the utility whether you are served by the City of Chesapeake’s Northwest River system, VA3550051, and request its latest water-quality report or the most recent fluoride results. The 2023 average above may not describe a different public system or a private well.
For a result specific to your tap, use a laboratory that tests drinking water for fluoride and follow its sampling instructions. Ask for the result in mg/L so you can compare it directly with the reported Chesapeake level and the reference values above. Our guide to how to test water quality at home explains how to approach testing.
If you want to reduce fluoride, look for a treatment device independently certified for fluoride reduction and check the specific model’s instructions. Reverse osmosis is one option; a pitcher or cartridge should not be assumed to remove fluoride simply because it filters water. See the best pitcher water filters and verify any model’s fluoride-reduction certification before buying.
Maintain the device and replace its filter as directed. If knowing the remaining fluoride level matters to you, a test of the treated water can show what is coming from your tap.
When should you ask a health professional?
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the Chesapeake fluoride data come from?
The status and operational-level figures come from two CDC My Water’s Fluoride reports: the 2025 Virginia status report and the 2023 monthly-level report linked above. The level is a mean of reported monthly values, not a new test of an individual home.
The local and state coverage percentages come from a separate CDC dataset for 2020. Because these sources describe different years and measures, the coverage percentages, system status and concentration should not be treated as interchangeable.
Frequently asked questions
Is 0.78 mg/L the same as 0.78 parts per million?
For dilute water, 0.78 mg/L is approximately 0.78 parts per million.
Does letting Chesapeake tap water stand remove fluoride?
No. Letting water stand does not remove dissolved fluoride.
Can taste tell me whether a filter removes fluoride?
No. A change in taste does not establish that a filter reduces fluoride; check the model’s fluoride-reduction certification or test the treated water.