Is There Fluoride in California Water?
Yes, for most residents: 57.5% of people on California community water systems received fluoridated water in 2020.
That figure does not tell you whether your own water is fluoridated or how much fluoride it contains. For local comparisons, see fluoride in tap water by city.
How much of California’s water is fluoridated?
In 2020, 57.5% of people served by California community water systems received fluoridated water. The percentage describes the population served by those systems, not the percentage of water sources, utilities or all California residents.
It is a statewide figure, so it does not establish the status of any particular city or water provider. It also does not describe water from a private well. A local report or test is needed to find out what is in your own supply.
Fluoride can occur naturally in water. Its presence alone does not mean a water system adds fluoride or practices fluoridation. The statewide percentage is a measure of people receiving fluoridated water, not a measured fluoride concentration.
What are California’s fluoride laws and policies?
The statewide percentage does not establish what California law requires of a particular water system. It also does not tell you whether a particular provider adds fluoride or whether fluoride found in its water comes from a natural source.
For current policy information, check with the California State Water Resources Control Board or your water provider. If you are asking about a specific address, identify the provider first: the name of the city on a mailing address may not be enough to identify the water system serving it.
Ask the provider whether it adds fluoride, whether the supply contains naturally occurring fluoride, and where to find its latest reported results. Those are separate questions; a single statewide percentage cannot answer them for your address.
How can you find out about your own city or utility?
Start with your water bill or your provider’s website to identify the utility serving your address. Look for its annual water quality report, often called a Consumer Confidence Report, and search the report for “fluoride.”
Note the unit and the sampling year alongside any reported result. A report may show a range as well as a reported level; check its notes to understand which sources and sampling period the figures cover. Do not assume an older result is the current concentration at your tap.
If the report does not answer your question, contact the provider. Ask whether it measures fluoride, whether it adds fluoride, and whether the reported results apply to the water source serving your address. You can also ask for help interpreting a result expressed in milligrams per liter (mg/L).
For a private well, a utility’s report will not tell you the fluoride level in your water. A laboratory that tests for fluoride can explain how to collect and submit a sample. Our guide to how to test water quality at home covers the testing process.
If you are considering a filter, check the documentation or independent certification for a specific fluoride-reduction claim. A general filtration claim does not establish that a product reduces fluoride. See our guide to the best pitcher water filters for options to compare.
What do the fluoride levels and standards mean?
The following numbers are reference values, not measurements of California’s water. Compare a local result in mg/L with the appropriate value rather than treating the values as interchangeable.
| Fluoride value | What it represents |
|---|---|
| 0.7 mg/L | The U.S. Public Health Service’s recommended level for community water fluoridation. |
| 2.0 mg/L | The EPA’s secondary drinking water standard for fluoride. |
| 4.0 mg/L | The EPA’s enforceable maximum contaminant level for fluoride. |
The recommended fluoridation level is not the same as either EPA standard. A local water quality report should provide the context needed to interpret its result, including the sampling period and any range reported.
When should you ask a professional?
Anyone with questions about fluoride in their drinking water can ask a dentist or doctor. Contact one if you want to discuss a test result or your household’s individual needs.
Where does the California data come from?
The 2020 statewide percentage comes from the CDC’s Community Water Fluoridation State and County Level data, based on the Water Fluoridation Reporting System. It describes the share of the served population receiving fluoridated water; it is not a statewide laboratory measurement in mg/L.
The comparison values come from the U.S. Public Health Service recommendation and EPA drinking water standards. To determine your own supply’s status or concentration, use your provider’s information or a fluoride test rather than the statewide percentage.
Frequently asked questions
Does boiling water remove fluoride?
No. Boiling does not remove fluoride, and evaporation can concentrate it in the remaining water.
Can you tell whether water contains fluoride by tasting it?
Taste is not a reliable way to determine whether water contains fluoride. Check a water quality report or have the water tested.
Does bottled water have the same fluoride level as local tap water?
Not necessarily. Bottled water may come from a different source; check its label or ask the bottler for fluoride information.