Is There Fluoride in Buffalo Water?
Yes, Buffalo Water adds fluoride, and its 2025 water quality report lists an average fluoride level of 0.28 mg/L.
Does Buffalo Water add fluoride?
The Buffalo Water 2025 water quality report says the utility adds fluoride to its drinking water. Its reported measurement describes the fluoride present in the water, not necessarily the amount added by the utility alone.
Fluoride can also occur naturally in water. Finding naturally occurring fluoride is not the same as a utility adding fluoride, but Buffalo Water’s report explicitly says that it adds it.
For comparisons with other systems, see fluoride in tap water by city. A result for Buffalo Water does not establish what a different utility adds or measures.
How much fluoride is in Buffalo Water?
Buffalo Water’s 2025 report lists an average of 280 micrograms per liter (µg/L) under October 20, 2025. That is equivalent to 0.28 milligrams per liter (mg/L).
| Measurement or standard | Fluoride level |
|---|---|
| Buffalo Water measured average, listed under October 20, 2025 | 0.28 mg/L |
| US Public Health Service recommendation for community water fluoridation | 0.7 mg/L |
| EPA secondary standard | 2.0 mg/L |
| EPA maximum contaminant level | 4.0 mg/L |
The reported Buffalo Water average is below all three comparison levels. The 0.7 mg/L figure is a recommendation for community water fluoridation, not an EPA maximum contaminant level. The EPA’s 2.0 mg/L secondary standard is a federal guideline, while 4.0 mg/L is the federal maximum contaminant level.
A measured average is not a promise that every tap will have that exact concentration at every time. The report also does not make a measurement from another water system a Buffalo Water result.
What is the county and state context?
Buffalo is in Erie County, New York. We found no county-wide percentage for people receiving fluoridated water, so the Buffalo Water result should not be used as a figure for the whole county.
According to CDC state and county fluoridation data, 71.5% of New York’s public water system population received fluoridated water in 2020. That percentage concerns people served by public water systems; it is not a percentage of every New York resident or a measurement of fluoride at a particular tap.
What does New York law say about fluoridation?
We found no verified summary of New York State law or policy on community water fluoridation. Buffalo Water’s report describes its own practice; it does not, by itself, establish a statewide requirement.
For a current answer about applicable rules, ask the New York State Department of Health or Buffalo Water. For a neighboring address, first identify the utility serving that address rather than assuming it receives Buffalo Water.
How can you check your water or remove fluoride?
Start by identifying your water supplier on your bill or by asking your landlord or property manager. Then look for that supplier’s latest annual water quality report and find the fluoride entry. Check the measurement date, units and whether the number is an average or another type of result.
If you want a result for your own tap, ask a certified drinking-water laboratory for a fluoride test. Follow the laboratory’s sampling and shipping instructions, and ask it to report the result in mg/L so you can compare it with the figures above. Our guide to how to test water quality at home explains the testing process.
If you want to reduce fluoride, look for a treatment device independently certified to reduce fluoride for the exact model you buy. Reverse osmosis systems and distillers are options, but check the product’s certification and instructions rather than assuming every device removes fluoride. Maintain the device and replace its components as directed.
Not every pitcher filter is designed to reduce fluoride. When comparing the best pitcher water filters, check each model’s specific fluoride-reduction claim and independent certification.
Who should you ask about fluoride?
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the Buffalo fluoride information come from?
The Buffalo figure and the statement that fluoride is added come from Buffalo Water’s annual drinking water quality report for calendar year 2025. The report lists the fluoride result in µg/L; the equivalent mg/L figure above uses the same reported average.
The New York percentage comes from CDC community water fluoridation data for 2020. It describes a different population and year from Buffalo Water’s 2025 measurement, so the two figures should not be treated as measurements of the same thing.
Frequently asked questions
Does boiling Buffalo water remove fluoride?
No. Boiling does not remove fluoride and can increase its concentration as water evaporates.
Can you tell whether Buffalo water contains fluoride by taste?
Taste is not a reliable way to determine whether water contains fluoride. A fluoride test can measure its concentration.
Does a standard water softener remove fluoride?
A standard water softener is not a reliable choice for fluoride removal. Look for a device specifically certified for fluoride reduction.