Is There Fluoride in Bridgeport Water?
Yes, the utility adds fluoride; its state-reported operational level averaged about 0.69 mg/L in 2023.
Does Bridgeport add fluoride to its water?
Bridgeport’s Aquarion main system is reported as fluoridated, with a status of adjusted. That means the reported status is not merely that fluoride occurs naturally: the utility adjusts the fluoride level. For other locations, see fluoride in tap water by city.
The CDC’s 2025 status report identifies the system as AQUARION WATER CO. - MAIN SYSTEM, with system ID CT0150011. That is a system-level report; it is worth confirming your water supplier if you are unsure which system serves your address.
How much fluoride is in Bridgeport water?
The state-reported operational fluoride level for the Aquarion main system averaged 0.69 mg/L in 2023, calculated as the mean of 12 monthly values. Those monthly values ranged from 0.68 mg/L to 0.72 mg/L in 2023.
| Reference | Fluoride level | What it represents |
|---|---|---|
| Bridgeport system | 0.69 mg/L | 2023 mean of monthly operational values |
| US Public Health Service | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Non-enforceable secondary drinking water standard |
| EPA maximum contaminant level | 4.0 mg/L | Enforceable drinking water limit |
The system’s 2023 operational mean was 0.01 mg/L below the US Public Health Service recommendation of 0.7 mg/L. It was also below both EPA standards. The 0.7 mg/L recommendation is not the same kind of threshold as EPA’s enforceable 4.0 mg/L limit.
The 2023 figure is an average, not a reading from every tap or a measurement of the water today. The operational average alone also does not establish whether a system meets a regulatory requirement; ask the utility for its latest report and current information.
How does Bridgeport compare with Fairfield County and Connecticut?
In 2020, 96.1% of Fairfield County’s population served by public water systems received fluoridated water, according to CDC data. The comparable figure for Connecticut was 90.4% in 2020.
These figures describe populations served by public water systems, not all county or state residents. They provide context for Bridgeport but do not establish the fluoride status or level at an individual address. They also refer to 2020, whereas the Aquarion system’s operational average is from 2023 and its cited status report is from 2025.
What is Connecticut’s fluoride law or policy?
The CDC figures describe reported water-system status and coverage; they do not establish what Connecticut law requires or whether a particular system is subject to a mandate. The adjusted status reported for Aquarion should not be treated as a summary of state law.
For current policy or questions about requirements for a specific system, contact Connecticut’s drinking water program or the water utility. Ask separately for the system’s current fluoride status and its most recent water-quality report.
How can you check or remove fluoride from your water?
First, identify your water supplier from your bill or by contacting the local utility. Ask for the latest water-quality report and the system’s current fluoride information. If your address is served by a private well or another system, the Aquarion system figures do not establish your water’s fluoride level.
For a measurement at your tap, use a laboratory that tests drinking water for fluoride, following its sampling instructions. A fluoride-specific home test is another option, but check its detection range and instructions before interpreting the result. Our guide explains how to test water quality at home.
If you want to reduce fluoride, look for a treatment device certified specifically for fluoride reduction. Reverse osmosis systems are one option; check the product’s certification and maintenance instructions rather than assuming every filter removes fluoride. For pitcher options, see our best pitcher water filters and verify that any model you consider is certified for fluoride reduction.
Ask a dentist or doctor if you have questions about fluoride in your drinking water.
Where does the fluoride data come from?
The CDC Fluoridation Status Report identifies the Aquarion main system as fluoridated and adjusted in 2025. It is the source for the system’s reported status, rather than a current tap measurement.
The CDC monthly fluoride level report contains the 2023 operational values for system CT0150011. The 0.69 mg/L figure is the mean of its 12 reported monthly values, not a separate sample taken at a Bridgeport home.
The CDC state and county fluoridation dataset supplies the 2020 Fairfield County and Connecticut percentages. Those population figures are useful for regional context, but they do not replace a current report or a tap test.
Frequently asked questions
Can I tell whether water contains fluoride by tasting it?
Taste is not a reliable way to determine the fluoride level. Check your supplier’s report or use a fluoride-specific water test.
Does boiling water remove fluoride?
Boiling is not a reliable way to remove fluoride. As water evaporates, the fluoride concentration can increase.
Is mg/L the same as parts per million for fluoride in water?
For dilute drinking water, 1 mg/L is approximately 1 part per million.